Moxa PM-7200-6MSC [10/155] Commands
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa PM-7200-6MSC [10/155] Commands

Moxa PM-7500-4GTXSFP [10/155] Commands
2
2. Commands
access-ip
Use access-ip in the VLAN configuration command as to restrict access to the switch to specified IP addresses.
Use the no form of this command to disable this feature or to remove the IP addresses from access list.
Commands
access-ip [ip-address netmask]
no access-ip [ip-address netmask]
Syntax
Description
access-ip Enable the accessible IP list
ip-address IP address
netmask IP netmask
Defaults The feature is disabled by default.
Command
Modes
VLAN configuration as management VLAN
Usage
Guidelines
This feature will take effect when the access-ip command is executed.
Examples
PT-7828(config)# interface mgmt
PT-7828(config-vlan)# access-ip 10.10.10.10 255.255.255.0
<IPV4ADDR:ipaddr> - IP address
<IPV4ADDR:netmask> - IP netmask
PT-7828(config-vlan)# access-ip
Error
messages
IP or netmask invalid
Access IP list full
Related
commands
show interface mgmt access-ip
acl id
NOTE
The command is supported only in Layer 3 switches
Use acl id interface configuration commands on the switch to attach ACL to the port. Use the no form of this
command to return to the default setting.
Commands
acl id { in | out}
no acl id
Syntax
Description
acl Configure access control list
id The access list ID
in Inbound traffic
out Outbound traffic
Defaults N/A
Command
Modes
Interface configuration

Содержание

Похожие устройства

Скачать