Moxa PM-7200-6MSC [32/155] Ip address
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa PM-7200-6MSC [32/155] Ip address

Moxa PT-7528-24TX-WV [32/155] Ip address
Moxa Command Line Interface (FW_4.x) Commands
2-23
ip address
Use the ip address VLAN configuration command on the switch to configure the IP retrieve mechanism of the
switch. Use no form of this command to return to the default.
Commands
ip address {static ip-address netmask | dhcp | bootp }
no ip address
Syntax
Description
ip Configure IP paramters
address Congiure IP address
static E.g., 11.22.33.44
ip-address IP address
netmask Subnet mask
dhcp Use DHCP to retrieve IP setting automatically
bootp Use BOOTP to retrieve IP setting automatically
Defaults N/A
Command
Modes
VLAN configuration as management VLAN
Usage
Guidelines
N/A
Examples
PT-7828(config-vlan)# ip address
static - Configure static IP
dhcp - Use DHCP to retrieve IP setting automatically
bootp - Use BOOTP to retrieve IP setting automatically
Error
messages
N/A
Related
commands
show interfaces mgmt
ip auto-assign
Use the ip auto-assign interface configuration command on the switch to enable and set the auto IP
assignment of specified interfaces. Use the no form of this command to remove an Ethernet port from a trunk
group.
Commands
ip auto-assign ipaddr
no ip auto-assign
Syntax
Description
ip Configure IP paramters
auto-assign Automatic port IP assignment through DHCP/BootP/RARP
ipaddr E.g., 11.22.33.44
Defaults N/A
Command
Modes
Interface configuration
Usage
Guidelines
This specified IP address must be in the same subnet of the system IP address
Examples
(static IP)
PT-7828(config-if)# ip auto-assign
<IPV4ADDR:ipaddr> - E.g., 11.22.33.44
Error
messages
Cannot configure on trunk member port
This IP address must be in the same subnet of the system IP address
Related
commands
show ip auto-assign

Содержание

Похожие устройства

Скачать