Moxa PM-7200-6MSC [135/155] Spanning tree priority

Moxa PM-7200-6MST [135/155] Spanning tree priority
Moxa Command Line Interface (FW_4.x) Commands
2-126
spanning-tree priority
Use the spanning-tree priority interface configuration command on the switch to set the interfaces priority
for the spanning-tree. Use the no form of this command to return to the default setting.
Commands
spanning-tree priority prioriy
no spanning-tree priority
Syntax
Description
spanning-tree Enable spanning tree
priority Configure port priority
priority Range from 0 to 240, in steps of 16
Defaults priority = 128
Command
Modes
interface configuration
Usage
Guidelines
0 <= priority <= 240, and must be multiples of 16.
Examples
PT-7828(config-rdnt)# spanning-tree priority
<UINT:prio> - Range from 0 to 61440, in steps of 4096
Error
messages
The bridge priority must be in the range from 0 to 240
The bridge priority must be multiples of 16
Related
commands
show redundancy spanning-tree
speed-duplex
Use the speed-duplex interface configuration command to specify the speed of the interface and its duplex
mode. Use the no form of this command to return the interface to its default value.
Commands
speed-duplex {10M-Full | 10M-Half | 100M-Full| 100M-Half | 1G-Full | Auto}
no speed-duplex
Syntax
Description
speed-duplex Configure speed and duplex operation
10M-Full Speed 10M-full
10M-Half Speed 10M-Half
100M-Full Speed 100M-Full
100M-Half Speed 100M-Half
1G-Full Speed 1G-Full
Auto Speed Auto
Defaults The default is Auto
Command
Modes
Interface configuration
Usage
Guidelines
N/A
Examples
PT-7828(config)# interface ethernet 1/1
PT-7828(config-if)# speed-duplex 100M-Full
Error messages Fiber port can not be set speed-duplex!!!
This port can not be set to 1G!!!
Parameter does not be defined!!!
Cannot configure on trunk member port 1/1
This setting cannot be applied on trunk port!
Related
commands
show interfaces ethernet

Содержание

Похожие устройства

Скачать