Moxa PM-7200-6MSC [40/155] Ip igmp snooping vlan

Moxa PT-508-SS-LC-24 [40/155] Ip igmp snooping vlan
Moxa Command Line Interface (FW_4.x) Commands
2-31
ip igmp-snooping vlan
Use the ip igmp-snooping vlan global configuration command on the switch to globally enable Internet Group
Management Protocol (IGMP) snooping on a VLAN. Use the no form of this command to disable IGMP snooping
on a vlan.
Commands
ip igmp-snooping vlan vlan-id [mrouter module/port]
no ip igmp-snooping vlan vlan-id [mrouter module/port]
Syntax
Description
ip Global IP configuration subcommands
igmp-snooping IGMP snooping
vlan VLAN parameters
vlan-id 1 to 4094
mrouter IGMP snooping query port enable
Module/port Port(Trunk) ID or list. E.g., 1/1,2,4-5,2/1,Trk1,Trk2-Trk4
Defaults N/A
Command
Modes
Global configuration
Usage
Guidelines
The IGMP snooping must be enabled first.
Examples
PT-7828(config)# ip igmp-snooping vlan 1 mrouter 1/1
PT-7828(config)# no ip igmp-snooping vlan 1 mrouter 1/1
Error messages Vlan entry not found!!!
IGMP Function is Disabled !!!
IGMP Function is only supported by 802.1Q VLAN mode!
Related
commands
ip igmp-snooping
ip igmp-snooping querier
ip igmp-snooping query-interval
ip igmp-snooping enhanced
show ip igmp
ip filter-ip
Use the ip filter-ip interface configuration command on the switch to add the IP filtering address entries. Use
the no form of this command to delete the filtering entries.
Commands
ip filter-ip allowed ip-address
no ip filter-ip allowed ip-address
Syntax
Description
ip Configure IP paramters
filter-ip IP filter
allowed Configured traffic allowed from specified IP
ip-address E.g., 11.22.33.44
Defaults N/A
Command
Modes
Interface configuration
Usage
Guidelines
N/A
Examples
PT-7828(config-if)# ip filter-ip allowed 192.168.127.1
<LF>
Error
messages
Not a unicast IP
Allowed only 8 filters at most

Содержание

Похожие устройства

Скачать