Moxa PM-7200-6MSC [142/155] Trunk group
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa PM-7200-6MSC [142/155] Trunk group

Moxa TN-5816BP-LV-LV [142/155] Trunk group
Moxa Command Line Interface (FW_4.x) Commands
2-133
native Set trunking native characteristics
vlan Set pvid vlanid in trunk mode
vlan-id 1 to 4094
Defaults vlan-id = 1
Command
Modes
Interface configuration
Usage
Guidelines
You can only use this command mode for configuring normal-range VLANs, that is, VLAN IDs
1
to 4094.
Examples
PT-7828(config-if)# switchport trunk native vlan 2
<UINT:vlanid> - 1 to 4094
Error
messages
vlan 4097 is invalid!! should be range from 1 to 4094
Related
commands
show vlan
show vlan config
trunk-group
Use the trunk-group interface configuration command on the switch to assign an Ethernet port to a trunk
group. Use the no form of this command to remove an Ethernet port from a trunk group.
Commands
trunk-group trunk_id
no trunk-group
Syntax
Description
trunk-group Join trunk group as members
trunk_id Trunk ID. From 1 to 4
Defaults N/A
Command
Modes
Interface configuration
Usage
Guidelines
N/A
Examples
PT-7828(config-if)# trunk-group
<UINT:trunk_id> - Trunk ID. From 1 to 4
Error
messages
This setting cannot be applied on trunk port!
Trunk ID is only allowed from 1 to 4
Related
commands
show interfaces trunk
trunk-mode
Use the trunk-mode interface configuration command on the switch to set the trunk mode of the specified
trunk group. Use the no form of this command to return to the default setting.
Commands
trunk-mode { static | lacp }
no trunk-mode
Syntax
Description
trunk-mode Trunk mode configuration
static Configure as static trunk
lacp Configure as LACP trunk
Defaults The default trunk mode of creating trunk manually is static.
Command
Modes
Interface configuration

Содержание

Похожие устройства

Скачать