Moxa PM-7200-6MSC [123/155] Snmp server user

Moxa PM-7500-4MSC [123/155] Snmp server user
Moxa Command Line Interface (FW_4.x) Commands
2-114
Defaults The default mode is trap
Command
Modes
Global configuration
Usage
Guidelines
N/A
Examples
PT-7828(config)# snmp-server trap-mode trap
PT-7828(config)# snmp-server trap-mode inform retry 3 timeout 10
PT-7828(config)# no snmp-server trap-mode
Error
messages
Invalid inform retries value !!!
Invalid inform timeout value !!!
Related
commands
show snmp
snmp-server user
To configure a user and its authentication type and password to a Simple Network Management Protocol
(SNMP), use the snmp-server user global configuration command.
Commands
snmp-server user username auth auth-type password
Syntax
Description
snmp-server Configure SNMP server
user SNMP user setting
user-privilege SNMP user privilege
auth Specifies which authentication level should be used
auth-type no-auth | md5 | sha
password Password (maximum 30 characters)
Defaults N/A
Command
Modes
Global configuration
Usage
Guidelines
username is only allowed to be set as adminor user
auth-type is only allowed to be set as no-auth, md5or sha
Examples
PT-7828(config)# snmp-server user admin auth md5 moxacli
Error
messages
SNMP user must be ( admin | user )!!
SNMP authtype must be ( no-auth | md5 | sha )!!
Admin/User Password must be at least 8 bytes !!!
Admin/User Data Encryption must be at least 8 bytes !!!
Related
commands
show snmp
snmp-server version
To set up the snmp version, use the snmp-server version global configuration command.
Commands
snmp-server version [v1-v2c-v3 | v1-v2c | v3]
Syntax
Description
snmp-server Configure SNMP server
version SNMP version setting
v1-v2c-v3 Version 1, 2C and 3 support
v1-v2c Version 1 and 2C support
v3 Only version 3 support
Defaults Default version is v1-v2c

Содержание

Похожие устройства

Скачать