Moxa PM-7200-6MSC [151/155] Moxa command line interface fw_4 x commands
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa PM-7200-6MSC [151/155] Moxa command line interface fw_4 x commands

Moxa PM-7200-8TX [151/155] Moxa command line interface fw_4 x commands
Moxa Command Line Interface (FW_4.x) Commands
2-142
vlan mode
Use the vlan mode configuration command on the switch to change current VLAN mode operated on the
switch. Use the no form of this command to return to the default.
Commands
vlan mode { 1qvlan | pvlan | unaware }
no vlan mode
Syntax
Description
vlan Configure VLAN parameters
mode Set (default) vlan mode
1qvlan IEEE 802.1Q
pvlan Port-based vlan
unaware Unaware vlan
Defaults The default mode is 802.1Q mode in the product with 802.1Q supported; otherwise is
port-based VLAN mode.
Command
Modes
Global configuration
Usage
Guidelines
N/A
Examples
PT-7828(config)# vlan mode 1qvlan
1qvlan - IEEE 802.1Q
pvlan - Port-based vlan
unaware - Unaware vlan
Error
messages
N/A
Related
commands
show vlan
vrrp
To configure the Virtual Router Redundancy Protocol (VRRP) on an interface, use the vrrp command in VRRP
interface configuration mode. To disable the VRRP configuration, use the no form of this command
Commands
vrrp
vrrp vrid vrip ip-address
no vrrp
Syntax
Description
vrrp VRRP interface setting
vrid VRRP interface virtual router ID
vrip set virtual router ID and virtual IP
ip-address virtual IP(IPv4 address)
Defaults VRRP is not configured
Command
Modes
VRRP interface configuration
Usage
Guidelines
Use vrrp command in VLAN configuration mode to enable vrrp in the VLAN interface.
Examples
PT-7828(config-vlan)# vrrp 1 vrip 1.1.1.1
PT-7828(config-vlan)# no vrrp
Error messages Entry not Found!

Содержание

Похожие устройства

Скачать