MSI 870S-G46 [42/146] English

En-32

MS-7599 Mainboard

English

MS-7599 Mainboard

English

1T/2T Memory Timing

This item controls the SDRAM command rate. Select [1T] makes SDRAM signal

controller to run at 1T (T=clock cycles) rate. Selecting [2T] makes SDRAM signal

controller run at 2T rate.

DCT Unganged Mode

This feature is used to Integrate two 64-bit DCTs into a 128-bit interface.

Bank Interleaving

Bank Interleaving is an important parameter for improving overclocking capability of

memory. It allows system to access multiple banks simultaneously.

Power Down Enable

This is a memory power-saving technology. When the system does not access mem-

ory over a period of time, it will automatically reduce the memory power supply.

MemClk Tristate C3/ATLVID

This setting allows you to enable/disable the MemClk Tristating during C3 and

ATLVID.

FSB/DRAM Ratio

This item allows you to select the ratio of FSB/ DRAM.

Adjusted DRAM Frequency (MHz)

It shows the adjusted Memory frequency. Read-only.

HT Link Control

Press <Enter> to enter the sub-menu.

HT Incoming/ Outgoing Link Width

These items allow you to set the Hyper-Transport Link width. Setting to [Auto], the

system will detect the HT link width automatically.

HT Link Speed

This item allows you to set the Hyper-Transport Link speed. Setting to [Auto], the sys-

tem will detect the HT link speed automatically.

Adjusted HT Link Frequency (MHz)

It shows the adjusted HT Link frequency. Read-only.

Adjust PCI-E Frequency (MHz)

This 󰘰eld allows you to select the PCIE frequency (in MHz).

Auto Disable DRAM/PCI Frequency

When set to [Enabled], the system will remove (turn o󰘯) clocks from empty DRAM

DIMMs/ PCI slots to minimize the electromagnetic interference (EMI).

▶