Lainox CEV026S+LD25 [23/50] Operating details
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Lainox CEV026S+LD25 [23/50] Operating details

Lainox CEV026S+LD25 [23/50] Operating details
23
OPERATIONS
FOREWORD
Duringcooking(LEDonsteady)thedisplays
showtheactualvalues(currentstatus).Itis
anyhowpossibletocheckthesettings.For
thispurpose,proceedasfollows:
15 • OPERATING DETAILS
15.1 • DISPLAYING SETTINGS DURING
COOKING PHASE (without stopping)
Press key 1, the displays blink showing the
previous settings. After 10 sec. the actual
valuesreappear(TIMEOUT)soingeneral:
displayblinking:valueset.
displayonsteady:actualvalue.
15.2 • CHANGING THE SETTINGS DURING
THE COOKING PHASE
(WITHOUT STOPPING)
15.3 • TEMPORARY STOP
Open the door. Cooking stops, the time
remaining to the end of cooking stops
until the door is closed again. Cooking
starts again from the point in which it was
interrupted.
15.4 • PERMANENT STOP
To stop an infinite cooking time or interrupt
it definitively, press key 15.
15.2 a
•
TEMPERATURE AND
TIME
To change the setting,
turn the relevant knob
to set the new value
(increasing to the
right, decreasing to
the left); the displays
show the settings that
have just been made,
after 10
sec. the actual
values reappear.
15.2 b
•
COOKING MODE
Press the key
corresponding to the
new cooking mode. The
correspondingLEDwill
light up.
15.2 c
•
HUMIDITY CONTROL
Press the humidity
control function key
12
(the display shows [
h.. ],
the previous setting).
Turn knob 10 to make
the new setting. After 10
sec. the actual values
reappear.
15.2 d
•
CORE PROBE
To change the setting,
turn the knob 10 to set
the new value. After
the 10 seconds of
TIMEOUTtheactual
values reappear.
90026410rev01

Содержание

Похожие устройства

Скачать