Hitachi WR18DBDL-TL [7/96] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi WR18DBDL-TL [7/96] English

Hitachi WR18DBDL-TL [7/96] English
English
6
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed
or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord
suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool.
Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position
before connecting to power source and/or battery pack, picking up
or carrying the tool.
Carrying power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool
on.
A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your
application.
The correct power tool will do the job better and safer at the rate
for which it was designed.
b) Do not use the power tool if the switch does not turn it on and
off.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect
the power tools operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed.
Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one type of battery pack may create
a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs.
Use of any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal
objects like paper clips, coins, keys, nails, screws, or other small
metal objects that can make a connection from one terminal to
another.
Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power tool is maintained.
PRECAUTION
Keep children and infirm persons away.
When not in use, tools should be stored out of reach of children and infirm persons.
PRECAUTIONS FOR CORDLESS IMPACT
DRIVER (WH14DBDL / WH18DBDL)
1. This is portable tool for tightening and loosenig screws. Use it only
for these operation.
2. Use the earplugs if using for a long time.
3. One-hand operation is extremely dangerous; hold the unit firmly with
both hands when operating.
4. After installing the driver bit, pull lightly out the bit to make sure that
it does not come loose. If the bit is not installed properly, it can come
loose during use, which can be dangerous.
5. Use the bit that matches the screw.
6. Tightening a screw with the impact driver at an angle to that screw
can damage the head of the screw and the proper force will not be
transmitted to the screw. Tighten with this impact driver lined up
straight with the screw.
(Original instructions)

Содержание

Похожие устройства

English Original instructions 4 Power tool use and care GENERAL POWER TOOL SAFETY WARNINGS a Do not force the power tool Use the correct power tool for your application A WARNING The correct power tool will do the job better and safer at the rate Read all safety warnings and all instructions for which it was designed Failure to follow the warnings and instructions may result in electric shock fire b Do not use the power tool if the switch does not turn it on and and or serious injury off Any power tool that cannot be controlled with the switch isdangerous Save all warnings and instructions for future reference and must be repaired The term power tool in the warnings refers to your mains operated corded c Disconnect the plug from the power source and or the battery pack power tool or battery operated cordless power tool from 1 Work area safety Such Cluttered or dark areas invite accidents b Do not operate power tools in explosive atmospheres such as children and bystanders away while persons operating a power Distractions can cause you to lose control matching outlets will reduce risk of contact with earthed or grounded surfaces such as gj Use with the the maintained cutting power and the work to be performed or these instructions to other condition of that moving may affect sharp and tool cutting instructions taking into bits edges are account etc the in less accordance working conditions a risk of fire when used with another battery pack b Use c shock location is unavoidable power tools only with specifically designated battery packs Use of any other battery packs may create a risk of injury and fire Use of a cord suitable for outdoor use reduces the risk of electric damp with A charger that is suitable for one type of battery pack may create cord suitable for outdoor use a tools a Recharge only with the charger specified by the manufacturer Damaged or entangled cords increase the risk of electric shock When operating a power tool outdoors use an extension in tool 5 Battery tool use and care Keep cord away from heat oil sharp edges or moving parts tool the result in a hazardous situation d Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool power changing starting Use of the power tool for operations different from those intended could Water entering a power tool will increase the risk of electric shock a any accessories with operating these tool There is an increased risk of electric shock if your body is earthed If power and or grounded c Do not expose power tools to rain or wet conditions f of likely to bind and are easier to control pipes radiators ranges and refrigerators e risk f Keep cutting tools sharp and clean Properly body adjustments the Many accidents are caused by poorly maintained power tools electric shock Avoid any reduce If damaged have the power tool repaired before use Do not use any adapter plugs with earthed grounded power tools b unfamiliar parts breakage of parts the power tools operation Never modify the plug in any way and making measures Power tools are dangerous in the hands of untrained users Maintain power tools Check for misalignment or binding e a Power tool plugs must match the outlet plugs before operate the power tool tool 2 Electrical safety Unmodified tool safety d Store idle power tools out of the reach of children and do not allow Power tools create sparks which may ignite the dust or fumes Keep power preventive power tool accidentally in the presence of flammable liquids gases or dust c the accessories or storing power tools a Keep work area clean and well lit When battery objects use like pack a residual current device RCD protected supply Use of an RCD reduces the risk of electric shock is paper metal objects another that not in use clips coins can make keep keys a it away nails from screws connection from or other metal other small one terminal to Shorting the battery terminals together may cause burns or a fire 3 Personal safety d Under abusive conditions liquid may be ejected from the battery a Stay alert watch what you are doing and use common sense when operating a power tool avoid of drugs alcohol or medicalion personal protective contact accidentally occurs flush with water If 6 Service a Have your power tool serviced by a qualified repair person using only serious personal injury Use If Liquid ejected from the battery may cause irritation or burns A moment of inattention while operating power tools may result in b contact liquid contacts eyes additionally seek medical help Do not use a power tool while you are tired or under the influence equ pment Always wear eye identical replacement parts protection Th is will ensure that the safety of the power tool is maintained Protective equipment such as dust mask non skid safety shoes hard hat or hearing protection used for appropriate conditions will reduce PRECAUTION personal injuries Keep children and infirm persons away c Prevent uninten tional starling Ensure the switch is in the off position before connecting to power source and or battery pack or carrying the tool Carrying power tools with your finger on the switch or When not in use tools should be stored out of reach of children and infirm persons picking up energising power tools that have the switch on invites accidents PRECAUTIONS FOR CORDLESS DRIVER WH14DBDL WH18DBDL IMPACT d Remove any adjusting key or wrench before turning the power tool 1 on may result in personal injury e Do not overreach Keep proper footing and balance at all f This enables better control of the power tool in unexpected situations Dress properly Do not wear loose clothing or jewellery Keep times devices collection are provided facilities for ensure the these connection are tool for tightening and bosenig screws Use it only Use the earplugs if using for a long time One hand operation is extremely dangerous hold the unit firmly with both hands when operating your 4 After installing the driver bit pull lightly out the bit to make sure that it does not come loose If the bit is not installed properly it can come of connected Use of dust cokedion can ledice dust related hazards portable 3 loose during use which can be dangerous Loose clothes jewellery or long hair can be caught in moving parts If is 2 hair clothing and gloves away from moving parts gj This for these operatbn A wrench or a key left attached to a rotating part of the power tool dust and extraction properly and used 5 Use the bit that matches the screw 6 Tightening a screw with the impact driver at an angle to that screw can damage the head of the screw and the proper force will not be transmitted to the screw Tighten with this impact driver lined up straight with the screw 6

Скачать