GRAPHITE 59G071 [14/152] Detailed safety regulations

14

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

STRAIGHT GRINDER

59G071

NOTE: BEFORE THE POWER TOOL IS USED FOR THE FIRST TIME, READ THIS INSTRUCTION MANUAL AND

KEEP IT FOR FUTURE REFERENCE.

DETAILED SAFETY REGULATIONS

WARNING! Read all warnings and guidelines for safe operation. Failure to observe recommendations

given in the following warnings and guidelines regarding safety of operation may cause danger of electric

Ɣ This power tool is not suitable for sanding with abrasive papers and wire brushes, as well as for

polishing and abrasive cutting.

Ɣ Do not use equipment, which is not designed and recommended by the manufacturer specically

for this device.

Ɣ The permissible rotational speed of a working tool used cannot be lower than the maximum

rotational speed given on the power tool.

A working tool rotating faster than the permissible speed may break and its parts may chip off.

Ɣ The outside diameter and thickness of a working tool must correspond to dimensions of the

should be checked for cracks, abrasion or heavy wear. When the power tool or a working tool

is dropped, it must be checked for damage or another, undamaged tool should be used. If a

working tool is checked and fastened, the power tool should be switched on for a minute at the

Ɣ Always wear personal protective equipment. Depending on a type of work, a full face mask, eye

dust mask and protective mask for the respiratory system must filter dust produced during work. The

handle. A contact with the power mains network may transfer voltage onto metal parts of the power

tool, which may result in electric shock.

Ɣ The power cord must be kept away from the rotating working tools. When the control over the tool