![Bosch GLL 3-15 + мини штатив (0.601.063.M00) [7/77] Assembly](/img/pdf.png)
Bosch GLL 3-15 + мини штатив (0.601.063.M00) [7/77] Assembly
![Bosch GLL 3-15 + мини штатив (0.601.063.M00) [7/77] Assembly](/views2/1395429/page7/bg7.png)
English | 7
Bosch Power Tools 1 609 92A 301 | (20.6.16)
Technical Data
Assembly
Inserting/Replacing the Batteries
Alkali-manganese batteries are recommended for the meas-
uring tool.
To open the battery lid 3, press on the latch 2 and remove the
battery lid. Insert the batteries. When inserting, pay attention
to the correct polarity according to the representation on the
inside of the battery compartment.
If the battery warning 15 flashes, the batteries have to be
replaced.
Always replace all batteries at the same time. Only use batter-
ies from one brand and with the identical capacity.
Remove the batteries from the measuring tool when not
using it for extended periods. When storing for extended
periods, the batteries can corrode and self-discharge.
Using the Rotating Platform (see figure A)
Place the measuring tool on the tool mount of the rotating
platform 12 so that the locking grooves 13 of the rotating
platform fit between the corresponding grooves 6 on the bot-
tom of the measuring tool. Turn the measuring tool clockwise
to lock it on the rotating platform.
Extend the legs of the rotating platform using the height ad-
justment screws 10. Roughly align the rotating platform using
the vial 8.
Operation
Initial Operation
Protect the measuring tool against moisture and direct
sun light.
Do not subject the measuring tool to extreme tempera-
tures or variations in temperature. As an example, do
not leave it in vehicles for a long time. In case of large vari-
ations in temperature, allow the measuring tool to adjust to
the ambient temperature before putting it into operation.
In case of extreme temperatures or variations in tempera-
ture, the accuracy of the measuring tool can be impaired.
Avoid heavy impact or falling of the measuring tool.
After heavy exterior impact on the measuring tool, an accu-
racy check should always be carried out before continuing
to work (see “Levelling Accuracy”).
Switch the measuring tool off during transport. When
switching off, the levelling unit, which can be damaged in
case of intense movement, is locked.
Switching On and Off
To switch on the measuring tool, slide the on/off switch 7 to
the “On” position (for working without automatic levelling)
or to the “On” position (for working with automatic level-
ling). The power indicator 15 lights up and the measuring tool
immediately sends a horizontal laser line out of the front exit
opening 1.
Do not point the laser beam at persons or animals and
do not look into the laser beam yourself, not even from
a large distance.
To switch off the measuring tool, slide the on/off switch 7 to
the “Off” position. The power indicator 15 goes out. The pen-
dulum unit is locked when the tool is switched off.
When exceeding the maximum permitted operating tempera-
ture of 45 °C, the measuring tool switches off to protect the
laser diode. After cooling down, the measuring tool is ready
for operation and can be switched on again.
Line laser GLL 3-15 X
Article number
3 601 K63 M..
Working range
1)
–Laser lines
–Plumb point
m
m
15
5
Levelling accuracy of laser
lines, typically
2)
mm/m ±0.2
Self-levelling range, typically
°±3
Levelling duration, typically
s<4
Operating temperature
°C –10 ... +45
Storage temperature
°C –20...+70
Relative air humidity, max.
%90
Laser class
2
Laser type
nm
mW
630–650
<1
C
6
1
Tripod Mount
3)
"5/8
Batteries
4x1.5VLR6(AA)
Operating time, approx.
– with 1 laser line
– with 2 laser lines
– with 3 laser lines
h
h
h
24
14
10
Weight according to
EPTA-Procedure 01:2014
kg 0.54
Dimensions
(lengthx widthx height)
– without rotating platform
– with rotating platform
mm
mm
122 x 83 x 129
Ø 151 x 203
Degree of protection (exclud-
ing battery compartment)
IP 54*
1) The working range can be decreased by unfavourable environmental
conditions (e.g. direct sun irradiation).
2) ex-works
3) only available in combination with the rotating platform
* dust and splash proof
The measuring tool can be clearly identified with the serial number 4 on
the type plate.
OBJ_BUCH-2751-003.book Page 7 Monday, June 20, 2016 10:34 AM
Содержание
- Gll 3 15 x professional 1
- Gll 3 15 x 3
- English 6
- Intended use 6
- Product description and specifications 6
- Product features 6
- Safety notes 6
- Assembly 7
- Initial operation 7
- Inserting replacing the batteries 7
- Operation 7
- Technical data 7
- Using the rotating platform see figure a 7
- Automatic levelling 8
- Levelling accuracy 8
- Operation modes see figures b d 8
- 5 0 m 5 9
- 5 m 2 5 m 10
- Maintenance and cleaning 10
- Maintenance and service 10
- Working advice 10
- After sales service and application service 11
- Disposal 11
- Avertissements de sécurité 12
- Description et performances du produit 12
- Eléments de l appareil 12
- Français 12
- Utilisation conforme 12
- Caractéristiques techniques 13
- Fonctionnement 13
- Mise en place changement des piles 13
- Mise en service 13
- Montage 13
- Utilisation du plateau pivotant voir figure a 13
- Modes de fonctionnement voir figures b d 14
- Nivellement automatique 14
- Précision de nivellement 14
- 5 0 m 5 15
- 5 m 2 5 m 16
- Instructions d utilisation 16
- Entretien et service après vente 17
- Español 17
- Instrucciones de seguridad 17
- Nettoyage et entretien 17
- Service après vente et assistance 17
- Élimination des déchets 17
- Componentes principales 18
- Datos técnicos 18
- Descripción y prestaciones del producto 18
- Utilización reglamentaria 18
- Inserción y cambio de las pilas 19
- Modos de operación ver figuras b d 19
- Montaje 19
- Operación 19
- Puesta en marcha 19
- Utilización de la plataforma giratoria ver figura a 19
- Nivelación automática 20
- Precisión de nivelación 20
- 5 0 m 5 21
- 5 m 2 5 m 22
- Instrucciones para la operación 22
- Mantenimiento y limpieza 22
- Mantenimiento y servicio 22
- Eliminación 23
- Indicações de segurança 23
- Português 23
- Servicio técnico y atención al cliente 23
- Componentes ilustrados 24
- Dados técnicos 24
- Descrição do produto e da potência 24
- Utilização conforme as disposições 24
- Colocação em funcionamento 25
- Funcionamento 25
- Introduzir substituir pilhas 25
- Montagem 25
- Utilização da plataforma rotativa veja figura a 25
- Exatidão de nivelamento 26
- Modos de operação veja figura b d 26
- Nivelamento automático 26
- 5 0 m 5 27
- 5 m 2 5 m 28
- Indicações de trabalho 28
- Eliminação 29
- Güvenlik talimatı 29
- Manutenção e limpeza 29
- Manutenção e serviço 29
- Serviço pós venda e consultoria de aplicação 29
- Türkçe 29
- Bataryaların takılması değiştirilmesi 30
- Montaj 30
- Teknik veriler 30
- Usulüne uygun kullanım 30
- Ürün ve işlev tanımı 30
- Şekli gösterilen elemanlar 30
- Döner platformun kullanılması bakınız şekil a 31
- I şletim türleri bakınız şekiller b d 31
- I şletme 31
- Nivelman otomatiği 31
- Çalıştırma 31
- Nivelman hassaslığı 32
- 5 0 m 5 33
- 5 m 2 5 m 33
- Bakım ve servis 34
- Bakım ve temizlik 34
- Müşteri hizmeti ve uygulama danışmanlığı 34
- Çalışırken dikkat edilecek hususlar 34
- Tasfiye 35
- Русский 35
- Изображенные составные части 36
- Описание продукта и услуг 36
- Применение по назначению 36
- Указания по безопасности 36
- Использование поворотной платформы см рис а 37
- Работа с инструментом 37
- Сборка 37
- Технические данные 37
- Установка замена батареек 37
- Эксплуатация 37
- Автоматическое нивелирование 38
- Режимы работы см рис в d 38
- Точность нивелирования 38
- 5 0 m 5 39
- 5 m 2 5 m 40
- Сервис и консультирование на предмет использования продукции 41
- Техобслуживание и очистка 41
- Техобслуживание и сервис 41
- Указания по применению 41
- Вказівки з техніки безпеки 42
- Українська 42
- Утилизация 42
- Вставлення заміна батарейок 43
- Зображені компоненти 43
- Монтаж 43
- Опис продукту і послуг 43
- Призначення 43
- Технічні дані 43
- Автоматичне нівелювання 44
- Використання поворотної платформи див мал a 44
- Експлуатація 44
- Початок роботи 44
- Режими роботи див мал b d 44
- Точність нівелювання 45
- 5 0 m 5 46
- 5 m 2 5 m 47
- Вказівки щодо роботи 47
- Технічне обслуговування і очищення 47
- Технічне обслуговування і сервіс 47
- Сервіс та надання консультацій щодо використання продукції 48
- Утилізація 48
- Қaзақша 48
- Бейнеленген құрамды бөлшектер 49
- Тағайындалу бойынша қолдану 49
- Қауіпсіздік нұсқаулары 49
- Өнім және қызмет сипаттамасы 49
- Айналатын платформаны пайдаланыңыз а суретін қараңыз 50
- Батареяларды салу алмастыру 50
- Жинау 50
- Пайдалану 50
- Пайдалануға ендіру 50
- Техникалық мәліметтер 50
- Нивелирлеу автоматикасы 51
- Нивелирлеу дәлдігі 51
- Пайдалану түрлері b d суреттерін қараңыз 51
- 5 0 m 5 52
- 5 m 2 5 m 53
- Пайдалану нұсқаулары 53
- Техникалық күтім және қызмет 53
- Қызмет көрсету және тазалау 53
- Безбедносни напомени 54
- Кәдеге жарату 54
- Македонски 54
- Тұтынушыға қызмет көрсету және пайдалану кеңестері 54
- Илустрација на компоненти 55
- Монтажа 55
- Опис на производот и моќноста 55
- Ставање менување на батерии 55
- Технички податоци 55
- Употреба со соодветна намена 55
- Автоматика за нивелирање 56
- Користење на ротирачката платформа види слика a 56
- Начини на работа види слики b d 56
- Ставање во употреба 56
- Употреба 56
- Точност при нивелирање 57
- 5 0 m 5 58
- 5 m 2 5 m 59
- Одржување и сервис 59
- Одржување и чистење 59
- Совети при работењето 59
- Komponente sa slike 60
- Opis proizvoda i rada 60
- Srpski 60
- Upotreba koja odgovara svrsi 60
- Uputstva o sigurnosti 60
- Отстранување 60
- Сервисна служба и совети при користење 60
- Montaža 61
- Puštanje u rad 61
- Tehnički podaci 61
- Ubacivanje baterije promena 61
- Upotreba obrtne platforme pogledajte sliku a 61
- Automatika niveliranja 62
- Tačnost nivelisanja 62
- Vrste režima rada pogledajte slike b d 62
- 5 0 m 5 63
- Uputstva za rad 64
- Održavanje i servis 65
- Održavanje i čišćenje 65
- Servisna služba i savetovanje o upotrebi 65
- Uklanjanje djubreta 65
- ماﺪﺨﺘﺳﻻا ةرﻮﺸﻣو ﻦﺋﺎﺑﺰﻟا ﺔﻣﺪﺧ 66
- ﺔﻣﺪﺨﻟاو ﺔﻧﺎﻴﺼﻟا 66
- ﺔﻴﺋﺎﺑﺮﻬﻜﻟا ةﺪﻌﻟا ﻦﻣ ﺺﻠﺨﺘﻟا 66
- ﻒﻴﻈﻨﺘﻟاو ﺔﻧﺎﻴﺼﻟا 66
- ﻲﺑﺮﻋ 66
- 5 m 2 5 m 67
- ﻞﻐﺷ تﺎﻈﺣﻼﻣ 67
- 5 0 m 5 68
- B d رﻮﺼﻟا ﻊﺟاﺮﺗ ﻞﻴﻐﺸﺘﻟا قﺮﻃ 69
- ﺔﻳﻮﺴﺘﻟا ﺔﻗد 69
- ﺔﻳﻮﺴﺘﻟا ﺔﻴﻟآ 69
- ﻲﺑﺮﻋ 69
- A ةرﻮﺼﻟا ﻊﺟاﺮﺗ ةراوﺪﻟا ﺔﺼﻨﻤﻟا ماﺪﺨﺘﺳا 70
- C 10 45 70
- C 20 70 70
- Gll 3 15 x 70
- Lr6 aa 70
- X 83 x 122 203 x 151 ø 70
- تﺎﻳرﺎﻄﺒﻟا لاﺪﺒﺘﺳا ﺐﻴﻛﺮﺗ 70
- ﺐﻴﻛﺮﺘﻟا 70
- ﻞﻴﻐﺸﺘﻟا 70
- ﻞﻴﻐﺸﺘﻟا ءﺪﺑ 70
- ﻲﺑﺮﻋ 70
- ءادﻷاو ﺞ ﺘﻨﻤﻟا ﻒﺻو 71
- نﺎﻣﻷا تﺎﻤﻴﻠﻌﺗ 71
- ﻲﺑﺮﻋ 71
- نﺎﯾﺮﺘﺸﻣ ﺎﺑ هروﺎﺸﻣ و شوﺮﻓ زا ﺲﭘ تﺎﻣﺪﺧ 72
- هﺎﮕﺘﺳد ندﺮﮐ جرﺎﺧ هدر زا 72
- هﺎﮕﺘﺳد ندﺮﮐ ﺰﯿﻤﺗ و ﺮﯿﻤﻌﺗ ﺖﺒﻗاﺮﻣ 72
- ﯽﻠﻤﻋ یﺎﻫ ﯽﺋﺎﻤﻨﻫار 72
- ﺲﯾوﺮﺳ و ﺖﺒﻗاﺮﻣ 72
- ﻰﺳرﺎﻓ 72
- 5 m 2 5 m 73
- 5 0 m 5 74
- ﻰﺳرﺎﻓ 74
- B d ﺮﯾﻮﺼﺗ ﻪﺑ دﻮﺷ عﻮﺟر دﺮﮑﻠﻤﻋ عاﻮﻧا 75
- ندﺮﮐ زاﺮﺗ ﺖﻗد 75
- ﮏﯿﺗﺎﻣﻮﺗا زاﺮﺗ 75
- ﻰﺳرﺎﻓ 75
- Alkali manganese 76
- C 10 45 76
- C 20 70 76
- Epta procedure 01 2014 kg 0 54 76
- Gll 3 15 x 76
- M m 15 5 76
- Mm m 0 2 76
- Nm mw 630 650 1 76
- X 1 5 v lr6 aa 76
- X 83 x 129 122 x 83 x 129 ø 151 x 203 76
- نادﺮﮔ ی ﻪﺤﻔﺻ زا هدﺎﻔﺘﺳا a ﺮﯾﻮﺼﺗ ﻪﺑ دﻮﺷ عﻮﺟر 76
- هﺎﮕﺘﺳد دﺮﺑرﺎﮐ هﻮﺤﻧ 76
- یﺮﺗﺎﺑ ﺾﯾﻮﻌﺗ نداد راﺮﻗ هﻮﺤﻧ 76
- ﯽﻨﻓ تﺎﺼﺨﺸﻣ 76
- ﺐﺼﻧ 76
- ﻰﺳرﺎﻓ 76
- نآ دﺮﮑﻠﻤﻋ و هﺎﮕﺘﺳد ﺢﯾﺮﺸﺗ 77
- ﯽﻨﻤﯾا یﺎﻫ ﯽﺋﺎﻤﻨﻫار 77
- ﻰﺳرﺎﻓ 77
Похожие устройства
- Bosch GSR 120-LI (0.601.9F7.001) Инструкция по эксплуатации
- BERGER BG2086 Инструкция по эксплуатации
- Feron 27638 Инструкция по эксплуатации
- Feron 27722 Инструкция по эксплуатации
- Feron 32179 LB4301 Инструкция по эксплуатации
- Energolux WMI-300 Инструкция по эксплуатации
- ROCK FORCE RF-V30/50 Инструкция по эксплуатации
- Spyheat SDF-421H Инструкция по эксплуатации
- Spyheat SDF-421H (беж.) Инструкция по эксплуатации
- Bosch EasyPrune (0.600.8B2.000) Инструкция по эксплуатации
- Bosch GCL 2-15G+RM1+BM3 (0.601.066.J00) Инструкция по эксплуатации
- Bosch AQT 45-14 (0.600.8A7.400) Инструкция по эксплуатации
- Кедр К-304 8004489 Инструкция по эксплуатации
- Белмаш РОДНИК 250/40 (N004A) Инструкция по эксплуатации
- Белмаш РОДНИК 250Н/16 (N006A) Инструкция по эксплуатации
- Bosch EasyAquatak 120 (0.600.8A7.920) Инструкция по эксплуатации
- Белмаш РОДНИК 250Н/40 (N008A) Инструкция по эксплуатации
- HEATUS 30GSR2-CR (HAGSR30CR) Инструкция по эксплуатации
- HEATUS 24GSR2 (HAGSR240) Инструкция по эксплуатации
- Bosch Дальномер GLM 80 (0.601.072.300) +Мышь Logitech M280 Инструкция по эксплуатации