Trotec Speedy 500 [18/61] Location

8023 | V5.0_EN (11/2015)

Technical changes reserved

 Trotec Laser GmbH

Page 18 of 61

3.3 Location

Before you install the laser system, you should select an appropriate location. Follow the

guidelines shown below:

Avoid locations where the system is exposed to high temperatures, dust and

high humidity (The humidity must not exceed 70% and the temperature must

not be close to the dew point).

Avoid locations, where the system is exposed to mechanical shocks

Fuse protection:

Do not connect other devices via the laser fuse, as the laser system requires

the full amperage.

Avoid locations with poor air circulation.

Select a location, whose room temperature is between 15 C and 25 C (59 - 77

F). Avoid higher ambient temperatures and strong exposure of the machine to

the sun. Use blinds, if required.

Select a location close to ventilation (if available).

Select a location that is not more than 2.50 m away from your computer (max.

cable length to avoid disturbing interferences).

Try to place a working table or a place to put things next to it. This shall avoid,

that the machine is misused as a table.

3.4