Qtech QSW-2910-09T-POE-AC/DC [169/212] 1 configure user

+7(495) 797-3311 www.qtech.ru

Москва, Новозаводская ул., 18, стр. 1

169

!Display current group configuration.

QTECH(config)# show snmp group

13.5.2.11 Configure user

Use this configuration to configure user for local engine and recognizable remote engine.

Following users are default to exist: 1. initialmd5 (required md5 authentication), 2. Initial sha

(required sha authentication), 3. Initial none (non-authentication). The above three users are

reserved for system not for user. The engine the user belonged to must be recognizable.

When deleting recognizable engine, contained users are all deleted. At most 64 users can be

configured. Configure it in global configuration mode:

snmp-server user username groupname [ remote host [ udp-port port ] ] [ auth { md5 | sha }

{ authpassword { encrypt-authpassword authpassword | authpassword } | authkey

{ encrypt-authkey authkey | authkey } } [ priv des { privpassword { encrypt-privpassword

privpassword | privpassword } | privkey { encrypt-privkey privkey | privkey } } ]

no snmp-server user username [ remote host [ udp-port port ] ]

Display configured user in any configuration mode:

show snmp user

Username is the username to be configured. It ranges from 1 to 32 characters,excluding space.

Groupname is the groupname that user going to be added. It ranges from 1 to 32

characters,excluding space.

Host is remote engine ip address. If it is vacant, it is default to be local engine.

Port is the port number of remote engine. If it is vacant, it is default to be 162.

Authpassword is authentication password. Unencrypted password ranges from 1 to 32

characters. To avoid disclosing, this password should be encrypted. To configured encrypted

password needs client-side which supports encryption to encrypt password, and use encrypted

cryptograph to do the configuration. Cryptograph is different by different encryption. Input

cryptograph in the form of hexadecimal system, such as

―a20102b32123c45508f91232a4d47a5c‖

Privpassword is encryption password. Unencrypted password ranges from 1 to 32 characters.

To avoid disclosing, this password should be encrypted. To configured encrypted password

needs client-side which supports encryption to encrypt password, and use encrypted

cryptograph to do the configuration. Cryptograph is different by different encryption. Input

cryptograph in the form of hexadecimal system, such as

―a20102b32123c45508f91232a4d47a5c‖

Authkey is authentication key. Unauthenticated key is in the range of 16 byte (using md5 key

folding) or 20 byte (using SHA-1 key folding). Authenticated key is in the range of 16 byte

(using md5 key folding) or 24 byte (using SHA-1 key folding).