Qtech QSW-2910-09T-POE-AC/DC [30/212] Port mode configuration

+7(495) 797-3311 www.qtech.ru

Москва, Новозаводская ул., 18, стр. 1

no flow-control

For example:

!Enable flow control on Ethernet 0/5

QTECH(config-if-ethernet-0/5)#flow-control

!Disable flow control on Ethernet 0/5

QTECH(config-if-ethernet-0/5)#no flow-control

Use following command in any configuration mode to display interface flow-control:

show flow-control [ interface-num ]

For example:

!Display flow-control of Ethernet 0/5

QTECH(config-if-ethernet-0/5)#show flow-control ethernet 0/5

2.2.12 Port mode configuration

This command is for configuring port type. Port can be trunk, hybrid and access,trunk port is

tagged in the vlan it belongs to, so the packets sent by this port is tagged; hybrid port can be

tagged and untagged in the vlan it belongs to, so it allows packets of multiple VLANs to be

sent with or without the Tag label; accessonly port belongs to one VLAN and it is untagged in

VLAN. Configure it in interface configuration mode:

 Configure port mode

switchport mode { trunk | hybrid | access }

 Restore to default mode, hybrid port

no switchport mode

For example:

!Configure port 1 to be trunk

QTECH(config-if-ethernet-0/1)#switchport mode trunk

Shift to other port mode:

1. to access: keep default VLAN to be untagged vlan and deleted from other VLANs;

2. to hybrid: All vlan tagged status to be untagged;

3. to trunk: All vlan tagged status to be tagged;

2.2.13 The default vlan-id of port configuration

Use this command to configure the default vlan-id. Use the no command to restore it to default

vlan ID. When received untagged packets, this port will forward it to default vlan. Packets

sending and receiving is with IEEE 802.1Q standard. Configure it in interface configuration