Qtech QSW-2910-09T-POE-AC/DC [43/212] Interface shutdown control configuration list

+7(495) 797-3311 www.qtech.ru

Москва, Новозаводская ул., 18, стр. 1

the interface will be shut down and failure trap will be sent. After a while(it is defaulted to be

480 seconds, which can be configured), it may reopen. If the interface will not reshutdown-

control in 2 seconds, it turns normal and normal trap will be sent. If the interface reshutdown-

control in 2 seconds, the failure trap will not be sent.

2.7.2 Interface shutdown-control Configuration list

Interface shutdown-control Configuration list is as following:

 shutdown-control Configuration

 Configure shutdown-control open-time

 Display shutdown-control

 Recover shutdown-control

2.7.3 shutdown-control Configuration

Configure it in interface configuration mode:

 Enable shutdown-control

shutdown-control [ broadcast | multicast | unicast ] target-rate

 Disable shutdown-control

no shutdown-control [ broadcast | multicast | unicast ]

By default, shutdown-control is disabled.

Example:

!Enable shutdown-control of e0/8 for broadcast and speed rate is

100pps.

QTECH(config-if-ethernet-0/8)#shutdown-control broadcast 100

2.7.4 Configure shutdown-control open-time

Configure it in global configuration mode:

 Configure shutdown-control open-time

shutdown-control-open-time

The default shutdown-control open-time is 480 seconds.

Example:

!Configure shutdown-control-open-time of CAR is 20 seconds

QTECH(config)# shutdown-control-open-time 20