Stiga TORNADO 2098 H Инструкция по эксплуатации онлайн [53/168] 514658

c) Remove the filtering element (3a + 3b).

d) Remove the pre-filter (3b) from the cartridge

(3a).

e) Tap the cartridge (3a) on a solid surface and

blow it from the inside with compressed air to

remove dust and debris.

f) Wash the sponge pre-filter (3b) with water and

detergent and leave it to dry in the air.

IMPORTANT

Do not use water, petrol,

detergents or any other products to clean the

cartridge.

IMPORTANT

The sponge pre-filter (3b)

must NEVER be oiled.

g) Clean the inside of the filter housing (4) from

dust and debris, making sure to block the inlet

duct with a rag (5) to prevent them from enter-

ing the engine.

h) Remove the rag (5), install the filtering element

(3b + 3a) in its housing and refit the cover (1).

6.6

SPARK PLUG SERVICE

a) Remove the spark plug (1) using a spark plug

socket wrench (2).

b) Clean the electrodes (3) with a metal brush

and remove any carbonaceous build-up.

c) Using a thickness gauge (4), check for the

right gap (0.6 - 0.8 mm) between the elec-

trodes.

d) Install the spark plug (1) and tighten with a

socket wrench (2).

Replace the spark plug if the electrodes are burnt

or if the porcelain is broken or damaged.

WARNING!

Fire hazard! Do not check

the ignition system with spark plug re mo

v ed.

IMPORTANT

Use only spark plugs of the

recommended type (see 8.1).