Daikin CDX25AVMA [158/268] Wiring

Daikin CDK60AVMA [158/268] Wiring

ED12-321A Indoor Units

Installation Manual 153

4

125

60

83

503.5 44.5

290

52

1050

99.5

52 90 55

100

100

3) Shape the refrigerant pipe along the pipe path marking on the

mounting plate.

4) Pass drain hose and refrigerant pipes through the wall hole,

then set the indoor unit on mounting plate hooks, using the

markings at the top of indoor unit as a guide.

5) Pull in the interconnecting wires.

6) Connect the inter-unit piping.

7)

Wrap the refrigerant pipes and drain hose together with insulation

tape as right figure, in case of setting the drain hose through the back

of the indoor unit.

8) While exercising care so that the

interconnecting wires do not catch

indoor unit, press the bottom edge of

indoor unit with both hands until it is

firmly caught by the mounting plate

hooks. Secure indoor unit to the

mounting plate with screws (M4 × 12L).

3-3. Wall Embedded Piping

Follow the instructions given under

1) Insert the drain hose to this

depth so it wont be pulled out

of the drain pipe.

4. Wiring.

, install as described in the installation

manual supplied with the Multi outdoor unit.

1) Strip wire ends (15 mm).

2) Match wire colours with terminal

numbers on indoor and outdoor unit’s

terminal blocks and firmly screw wires

to the corresponding terminals.

3) Connect the earth wires to the

corresponding terminals.

4) Pull wires to make sure that they are securely latched up, then

retain wires with wire retainer.

5) In case of connecting to an adapter system. Run the remote control

cable and attach the S21 connector as the illustration above.

6) Shape the wires so that the service lid fits securely, then close

service lid.

Wrap insulating tape around the bent portion

of refrigerant pipe.

Overlap at least half the width of the tape

with each turn.

Drain

hose

Caulk this hole

with putty or

caulking material.

Bind with plastic

tape.

A

Mounting plate

Refrigerant

pipes

Drain hose

Bottom frame

H M4 × 12L (2 point)

Mounting

plate

A

Left-Side, Left-Back, or Left Bottom Piping

Inner wall

Vinyl chloride

drain pipe

(VP-30)

Drain hose50 mm

or more

Insert drain hose

to this depth so

it won’t be pulled

out of drain pipe.

Outer wall

With a Multi indoor unit

Shape wires so that the service

lid will fit securely.

Terminal block

Electrical component box

Wire retainer

Firmly secure wire retainer

so that wires sustain no

external stress.

Use the specified wire type.

1

2

3

123 LN

Safety

breaker

20A

Earth leakage

circuit breaker

Earth

When wire length exceeds

10 m, use 2.0-mm wires.

H05VV

Firmly fix the wires with

the terminal screws.

Outdoor unit

Indoor

unit

Power

supply

50Hz 220V - 240V

60Hz 220V - 230V

Firmly fix the wires with

the terminal screws.

Do not use tapped wires, stand wires, extensioncords, or starbust connections,

as they may cause overtheating, electrical shock,or fire.

Warning

Содержание

Похожие устройства