Daikin EHYHBH05AFV32 [95/252] Installation

7 | Installation

Installer reference guide

EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA

Daikin Altherma hybrid heat pump

4P355634-1F – 2020.10

# Action

2 Insert a screwdriver into the slots underneath the user interface and

carefully separate the faceplate from the wallplate.

The PCB is mounted in the faceplate of the user interface. Be careful

NOT to damage it.

3 Fix the wallplate of the user interface to the wall.

4 Connect as shown in 4A, 4B, 4C or 4D.

5 Reinstall the faceplate onto the wallplate.

Be careful NOT to pinch the wiring when attaching the frontplate to the

unit.

(a) The main user interface is required for operation, but has to be ordered separately

(mandatory option).

4A From the rear

PCB

1×

4B From the left

PCB

1×

4C From the top

PCB

1×

4D From the top centre

PCB

1×

a Notch this part for the wiring to pass through with nippers etc.

b Secure the wiring to the front part of the casing using the wiring

retainer and clamp.

7.11.10 To connect the shut-off valve

INFORMATION

Shut-off valve usage example. In case of one LWT zone, and a combination of

underfloor heating and heat pump convectors, install a shut-off valve before the

underfloor heating to prevent condensation on the floor during cooling operation.

For more information, see the installer reference guide.

1 Connect the valve control cable to the appropriate terminals as shown in the

illustration below.