Hitachi H25PV [8/44] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi H25PV [8/44] English

Hitachi H25PV [8/44] English
7
English
5. Replacing carbon brushes
Loosen the set screw and remove the tail cover.
Remove the brush caps and carbon brushes. After
replacing the carbon brushes, do not forget to tighten
the brush caps securely and to install the tail cover.
6. Service parts list
A: Item No.
B: Code No.
C: No. Used
D: Remarks
CAUTION:
Repair, modification and inspection of Hitachi Power
Tools must be carried out by a Hitachi Authorized
Service Center.
This Parts List will be helpful if presented with the
tool to the Hitachi Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of power tools, the
safety regulations and standards prescribed in each
country must be observed.
MODIFICATIONS:
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest technological
advancements.
Accordingly, some parts (i.e. code numbers and/or
design) may be changed without prior notice.
GUARANTEE
We guarantee Hitachi Power Tools in accordance with
statutory/country specific regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling
instruction, to a Hitachi Authorized Service Center.
NOTE:
Due to HITACHI’s continuing program of research and
development, the specifications herein are subject to
change without prior notice.
Information concerning vibration
The measured values were determined according to
EN60745.
Chiselling:
Vibration emission value
ah, Cheq = 9.7 m/s
2
Uncertainty K = 1.8 m/s
2
The declared vibration total value has been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
It may also be used in a preliminary assessment of
exposure.
WARNING
䡬 The vibration emission during actual use of the power
tool can differ from the declared total value depending
on the ways in which the tool is used.
䡬 To identify safety measures to protect the operator
that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
01Eng_H25PV_EE 1/27/10, 10:58 AM7

Содержание

Похожие устройства

English 5 Replacing carbon brushes Loosen the set screw and remove the tail cover Remove the brush caps and carbon brushes After replacing the carbon brushes do not forget to tighten the brush caps securely and to install the tail cover 6 Service parts list A Item No B Code No C No Used D Remarks CAUTION Repair modification and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance In the operation and maintenance of power tools the safety regulations and standards prescribed in each country must be observed MODIFICATIONS Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancements Accordingly some parts i e code numbers and or design may be changed without prior notice GUARANTEE We guarantee Hitachi Power Tools in accordance with statutory country specific regulation This guarantee does not cover defects or damage due to misuse abuse or normal wear and tear In case of complaint please send the Power Tool undismantled with the GUARANTEE CERTIFICATE found at the end of this Handling instruction to a Hitachi Authorized Service Center NOTE Due to HITACHI S continuing program of research and development the specifications herein are subject to change without prior notice Information concerning vibration The measured values were determined according to EN 60745 Chiselling Vibration emission value 3h Cheq 9 7 m s2 U ncerta inty K 1 8 m s2 7 The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another It may also be used in a preliminary assessment of exposure WARNING O The vibration emission during actual use of the power tool candifferfrom the declared total value depending on the ways in which the tool is used O To identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time

Скачать