Home
Главная
Skil
Циркулярная Пила
5265 LA
Инструкция по эксплуатации Страница: 10

Skil 5265 LA [10/160] Cutting width is determined by width of blade

Skil 5165 LA (F 015 516 5LA) [10/160] Cutting width is determined by width of blade

• Do not work materials containing asbestos (asbestos

is considered carcinogenic)

• Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

• Certain kinds of dust are classied as carcinogenic (such

as oak and beech dust) especially in conjunction with

additives for wood conditioning; wear a dust mask and

work with a dust extraction device when connectable

• Follow the dust-related national requirements for the

materials you want to work with

• Only use a saw table provided with a switch that prevents

restarting of the motor after interruption of voltage

• Only use a saw table provided with a kerf guide

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

• Useonlysawbladeswithaminimumdiameterof

184 mm, a maximum diameter of 184 mm and a

spindle hole of 16 mm

• Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

• Never use saw blades made of high speed steel (HSS)

• Never use grinding/cutting discs with this tool

BEFORE USE

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

• Remove all obstacles on top of as well as underneath the

cutting path before you start cutting

• Secure the workpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

• Use suitable detectors to find hidden utility lines or

call the local utility company for assistance (contact

with electric lines can lead to re or electrical shock;

damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

DURING USE

• The noise level when working can exceed 85 dB(A); wear

ear protection

• Never use the tool without the original protection guard

system

• Do not attempt to cut extremely small workpieces

• Do not work overhead with the tool

• In case of jamming or electrical or mechanical

malfunction, immediately switch o the tool and

disconnect the plug

• If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

AFTER USE

• When you put away the tool, switch o the motor and

ensure that all moving parts have come to a complete

standstill

• After switching o your circular saw, never stop the rotation

of the saw blade by a lateral force applied against it

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• Mounting saw blade 3

! disconnect the plug

- push spindle-lock button A and hold it while you

remove blade bolt B with blade wrench C

! push spindle-lock button A only when tool is at a

standstill

- release spindle-lock button A

- remove ange D

- open lower guard E with lever F and hold it while you

mount saw blade with saw teeth and arrow printed on

saw blade pointing in same direction as arrow on lower

guard

- release lower guard E

- mount ange D

! make sure that clamping surfaces G of flanges

are perfectly clean and face the blade

- push spindle-lock button A and hold it while you

tighten blade bolt with blade wrench 1/8 turn past

nger tight (ensures slippage of saw blade when it

encounters excessive resistance thus reducing motor

overload and saw kickback)

- release spindle-lock button A

• Adjusting cutting depth (0-65 mm) 4

- for an optimal quality cut the saw blade should not

extend more than 3 mm below the workpiece

- loosen knob H

- raise/lower foot J until desired cutting depth is set on

scale using indicator K

- tighten knob H

• Adjusting cutting angle (0-45°) 5

- loosen knob L

- tilt tool until desired cutting angle is set on scale using

indicator M

- tighten knob L

! when bevel cutting, cutting depth does not

correspond with value on cutting depth scale

• 90° Cutting angle check 5

- adjust and tighten foot J to maximum cutting depth 4

- adjust and tighten cutting angle to 0°

- check for a 90° angle between the blade and bottom of

foot with a square

• Line-of-cut indicator N 6

- for guiding tool along desired line of cut marked on the

workpiece

- for a straight 0° cut or a 45° bevel cut use the indicator

line concerned

! the wide part of the foot should rest on the

supported part of the workpiece

! cutting width is determined by width of blade

teeth and not by width of blade body

! always make trial cuts first to verify actual line of

cut

Содержание

Похожие устройства

Do not work materials containing asbestos asbestos After switching off your circular saw never stop the rotation of the saw blade by a lateral force applied against it WHEN CONNECTING NEW 3 PIN PLUG U K ONLY Do not connect the blue neutral or brown live wire in the cord of this tool to the earth terminal of the plug If for any reason the old plug is cut off the cord of this tool it must be disposed of safely and not left unattended is considered carcinogenic Dust from material such as paint containing lead some wood species minerals and metal may be harmful contact with or inhalation of the dust may cause allergic reactions and or respiratory diseases to the operator or bystanders wear a dust mask and work with a dust extraction device when connectable USE Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunction with additives for wood conditioning wear a dust mask and Mounting saw bl ade I disconnect the plug work with a dust extraction device when connectable push spindle lock button A and hold it while you remove blade bolt B with blade wrench C Follow the dust related national requirements for the materials you want to work with Only use a saw table provided with a switch that prevents restarting of the motor after interruption of voltage Only use a saw table provided with a kerf guide I push spindle lock button A only when tool Is at a standstill release spindle lock button A remove flange D open lower guard E with lever F and hold it while you mount saw blade with saw teeth and arrow printed on saw blade pointing in same direction as arrow on lower guard release lower guard E mountflange D ACCESSORIES SKIL can assure flawless functioning of the tool only when original accessories are used Use only saw blades with a minimum diameter of 184 mm a maximum diameter of 184 mm and a spindle hole of 16 mm Use only accessories with an allowable speed matching at least the highest no load speed of the tool Never use saw blades made of high speed steel HSS Never use grinding cutting discs with this tool make sure that clamping surfaces G of flanges are perfectly clean and face the blade push spindle lock button A and hold it while you tighten blade bolt with blade wrench 1 8 turn past finger tight ensures slippage of saw blade when it encounters excessive resistance thus reducing motor overload and saw kickback release spindle lock button A Adjusting cutting depth 0 65 mm for an optimal quality cut the saw blade should not extend more than 3 mm below the workpiece loosen knob H raise lower foot J until desired cutting depth is set on scale using indicator K tighten knob H Adjusting cutting angle 0 45 loosen knob L tilt tool until desired cutting angle is set on scale using indicator M tighten knob L BEFORE USE Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool Avoid damage that can be caused by screws nails and other elements in your workpiece remove them before you start working Remove all obstacles on top of as well as underneath the cutting path before you start cutting Secure the workpiece a workpiece clamped with clamping devi ces or i n a vice i s hel d more securely than by hand Use suitable detectors to find hidden utility lines or call the local utility company for assistance contact with electric lines can lead to fire or electrical shock damaging a gas line can result in an explosion penetrating a water pipe will cause property damage or an electrical shock Use completely unrolled and safe extension cords with a capacity of 16 Amps U K 13 Amps I when bevel cutting cutting depth does not correspond with value on cutting depth scale 90 Cutting angle check adjust and tighten foot J to maximum cutting depth adjust and tighten cuttin g angl e to 0 check for a 90 angle between the blade and bottom of foot with a square Line of cut indicator N for guiding tool along desired line of cut marked on the workpiece for a straight 0 cut or a 45 bevel cut use the indicator line concerned DURING USE The noise level when working can exceed 85 dB A wear ear protection Never use the tool without the original protection guard system Do not attempt to cut extremely small workpieces Donot work overhead with the tool In case of jamming or electrical or mechanical malfunction immediately switch off the tool and disconnect the plug If the cord is damaged or cut through while working do not touch the cord but immediately disconnect the plug the wide part of the foot should rest on the supported part of the workpiece cutting width is determined by width of blade teeth and not by width of blade body I always make trial cuts first to verify actual line of cut AFTER USE When you put away the tool switch off the motor and ensure that all moving parts have come to a complete standstill 10

Скачать