Skil 0760 RA [6/104] High pressure washer 0760
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Skil 0760 RA [6/104] High pressure washer 0760

Skil 0760 RA [6/104] High pressure washer 0760
6

High-pressure washer 0760
INTRODUCTION
• This tool has been designed for cleaning areas and
objects outside the house, vehicles and boats
• This tool is intended for domestic use only and is not
designed to operate with water from sources other than a
watertap
• This tool is not intended for professional use
• Readthisinstructionmanualcarefullybeforeuse
andsaveitforfuturereference3
• Payspecialattentiontothesafetyinstructionsand
warnings;failuretofollowthesemayresultin
seriousinjury
• Check whether the packaging contains all parts as
illustrated in drawing 2
• When parts are missing or damaged, please contact your
dealer
TECHNICAL DATA 1
Working pressure (P) 7 MPa
Maximum working pressure (Pmax) 10 MPa
Inlet pressure 0 - 0,6 MPa
TOOL ELEMENTS 2
A Trigger lock
B Trigger
C Inlet connector
D Water inlet
E Water lter
F Mains switch
G Spraying nozzle
H Detergent bottle
J Detergent nozzle
K Spray lance
L Hand gun
M Cleaning needle
N Storage rail (screwsnotsupplied)
P Storage strap (2)
Q High-pressure hose
R Water outlet
S Ventilation slots
T Connection for storage straps
SAFETY
GENERAL
• Use the tool and its accessories in accordance with this
instruction manual and in the manner intended for the
tool; use of the tool for operations, dierent from those
normally expected to be performed by the tool, could
result in a hazardous situation
• Neverdrawinsolvent-containingliquids,undiluted
acidsorsolvents(e.g.petrol,paintthinners,heating
oil); these liquids produce a highly ammable, explosive
and toxic sprayed vapour and they also corrode the tool
components
• Only use the tool when the ambient temperature is
between 0°C and 40°C
• Startworkingonlywhentoolandoperating
equipmentareinperfectconditionandsafeto
operate
• Be aware of the kickback forces that occur when starting
the high-pressure washer; hold hand gun and spray lance
rmly and take a secure stance
• Never clamp the trigger in position during operation
• Neverdirectthewaterjettowardsotherpeople,
animals,liveelectricalequipmentorthetoolitself4
• Never leave the tool unattended while the motor is
running
• Do not operate the tool in potentially explosive locations
• Alwaysswitchofftool,disconnectplugfrompower
source,andensurethereisnowaterpressurein
toolandhandgunbeforeadjusting,cleaningor
changingaccessories
PERSONALSAFETY
• This tool is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction
concerning use of the tool by a person responsible for
their safety
• Ensure that children do not play with the tool
• Wear suitable protective clothing to protect against
splashing water
• Donotusethetoolwithotherpersonsinthevicinity
unlesstheywearprotectiveclothing
• Do not spray materials containing asbestos and other
materials which contain substances which are hazardous
to your health
• Only clean tyres/tyre valves from a minimum distance of
30 cm to prevent damaging them (damaged vehicle tyres
may lead to fatal accidents)
• Donotdirectthewaterjetagainstyourselforothers
inordertocleanclothesorfootwear
WATERSUPPLY
• Onlyusethehigh-pressurehoseandcoupling
suppliedwiththetool
• Replace a damaged high-pressure hose immediately
(with identical specications)
• Do not kink or drive a motor vehicle over the high-
pressure hose
• Do not expose the high-pressure hose to sharp edges or
corners
• Ensure that all connecting hoses have properly sealed
joints
• Beawarethatthesprayedwatergeneratedbythe
toolisnotdrinkable
• According to the applicable regulations, the tool must
never be used on the drinking water net without a system
separator 5; use a suitable system separator as per EN
12729 type BA
ELECTRICAL SAFETY
• Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool (tools with
a rating of 230V or 240V can also be connected to a
220V supply)
• Connect the tool via a fault current (FI) circuit breaker
with a triggering current of 30 mA maximum

Содержание

Похожие устройства

High pressure washer Only use the tool when the ambient temperature is between 0 C and 40 C Start working only when tool and operating equipment are In perfect condition and safe to operate Be aware of the kickback forces that occur when starting the high pressure washer hold hand gun and spray lance firmly and take a secure stance Never clamp the trigger in position during operation Never direct the water Jet towards other people animals live electrical equipment or the tool Itself Never leave the tool unattended while the motor is running Do not operate the tool in potentially explosive locations Always switch off tool disconnect plug from power source and ensure there is no water pressure in tool and hand gun before adjusting cleaning or changing accessories PERSONAL SAFETY Thi s tool is not i ntended for use by person s includi ng children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the tool by a person responsible for their safety Ensure that children do not play with the tool Wear suitable protective clothing to protect against splashing water Do not use the tool with other persons in the vicinity unless they wear protective clothing Do not spray materials containing asbestos and other materials which contain substances which are hazardous to your health Only clean tyres tyre valves from a minimum distance of 30 cm to prevent damaging them damaged vehicle tyres may lead to fatal accidents Do not direct the water jet against yourself or others In order to clean clothes or footwear WATER SUPPLY Only use the high pressure hose and coupling supplied with the tool Replace a damaged high pressure hose immediately with identical specifications Do not kink or drive a motor vehicle over the highpressure hose Do not expose the high pressure hose to sharp edges or corners Ensure that all connecting hoses have properly sealed joints Be aware that the sprayed water generated by the tool Is not drinkable According to the applicable regulations the tool must never be used on the drinking water netwithout a system separator use a suitable system separator as per EN 12729 type BA ELECTRICAL SAFETY Always check that the supply vol tage I s the sam e as the voltage indicated on the nameplate of the tool tools with a rating of 230V or 240V can also be connected to a 220V supply Connect the tool via a fault current Fl circuit breaker with a triggering current of 30 mA maximum 0760 INTRODUCTION This tool has been designed for cleaning areas and objects outside the house vehicles and boats This tool is intended for domestic use only and is not designed to operate with water from sources other than a watertap This tool is not intended for professional use Read this Instruction manual carefully before use and save It for future reference Pay special attention to the safety Instructions and warnings fallure to follow these may result In serious Injury Check whether the packaging contains all parts as illustrated in drawing z When parts are missing or damaged please contact your dealer TECHNICAL DATA Working pressure P Maximum working pressure Pmax Inlet pressure 7 MPa 10 MPa 0 0 6 MPa TOOL ELEMENTS A Trigger lock B Trigger C Inlet connector D Water inlet E Water filter F Mains switch G Spraying nozzle H Detergent bottle J Detergent nozzle K Spray lance L Hand gun M Cleaning needle N Storage rail screws not supplied P Storage strap 2 Q High pressure hose R Water outlet S Ventilation slots T Connection for storage straps SAFETY GENERAL Use the tool and its accessories in accordance with this instruction manual and in the manner intended for the tool use of the tool for operations different from those normally expected to be performed by the tool could result in a hazardous situation Never draw in solvent containing liquids undiluted acids or solvents e g petrol paint thinners heating oil these liquids produce a highly flammable explosive and toxic sprayed vapour and they also corrode the tool components 6

Скачать