Skil 0780 RA Инструкция по эксплуатации онлайн [12/220] 92846
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Skil 0780 RA Инструкция по эксплуатации онлайн [12/220] 92846

Skil 0780 RA Инструкция по эксплуатации онлайн [12/220] 92846
12
- the chain life of the saw chain mainly depends upon
sucient lubrication and correct tensioning
- avoid tensioning the chain if it is hot, as this will cause
the chain to become overtensioned when it cools
down
• Lubrication !
Chain life and cutting capacity depend on optimum
lubrication; therefore the chain is automatically oiled
during operation via oil outlet L 2
! thechainsawisnotsuppliedfilledwithoil;itis
essentialtofillwithoilbeforeuse
! neveroperatethechainsawwithoutchainoilor
atanemptyoilreservoirlevel,asthiswillresult
inextensivedamagetotheproduct
- set chain saw on any suitable surface with oil reservoir
cap M facing upward
- unscrew cap and add chain saw oil (not included) until
reservoir is full
- avoid dirt or debris entering oil reservoir
- mount oil reservoir cap and tighten
! checkoillevelpriortostartingandregularly
duringoperation;refilloilwhenoillevelisbelow
indicatorN
- the oil reservoir lling will last approx. 15 minutes,
depending on sawing intensity and stops
- never use recycled/old oil
• Cord restraint @
- hook the loop in the extension cord over restraint P as
illustrated
- pull tight to secure the extension cord
• On/o #
- switch on tool by rst pressing safety switch Q and
then pulling trigger switch R
- switch o the tool by releasing trigger R
! donotstopchainsawaftersawingbyactivating
fronthandguardS2(=kickbackbrake)
• Kickback brake $
The kickback brake is a safety mechanism activated
through front hand guard S, when kickback occurs ->
chain stops immediately
The following function check should be carried out at
regular intervals:
- push front hand guard S forward and start the chain
saw -> the chain must not start
- to deactivate the kickback brake, release trigger switch
R and pull hand guard S backwards
• Operating the tool %
- always hold the chain saw rmly with both hands (front
handle T with the left hand and rear handle U with the right
hand); never operate chain saw using only one hand %a
- ensure power cord is located to the rear, away from the
chain and wood and so positioned that it will not be
caught on branches or the like during cutting
! thechainmustberunningatfullspeedbeforeit
makescontactwiththewood
- use metal gripping teeth V to secure the saw onto the
wood before starting to cut %a
- use the gripping teeth as a leverage point “✱” while
cutting %a
- reset the gripping teeth at a lower point when sawing
thicker logs by pulling the chain saw slightly
backwards until the gripping teeth release, and
reposition at a lower level to continue sawing; do not
remove the saw completely from the wood
- do not force the chain while cutting; let the chain do
the work, using gripping teeth V to apply minimum
leverage pressure
- use the chain saw only with secure footing
- hold the chain saw at the right-hand side of your body
%b
- do not operate the chain saw with arms fully extended
or attempt to saw areas which are dicult to reach, or
on a ladder %c
- never use the chain saw above shoulder height %d
- sawing is optimized when the chain speed remains
steady during cutting
! bewarewhenreachingtheendofthecut;the
weightofthesawmaychangeunexpectedlyasit
cutsfreefromthewood(accidentsmayoccurto
legsandfeet)
! alwaysremovethesawfromawoodcutwhilethe
sawisrunning
• Cutting logs
- support logs so that the face sides at the cut do not
close in against each other, which would result in the
chain being jammed or pinched
- position and set short logs safely prior to sawing
- when sawing, always take care to avoid hitting stones,
nails, etc., as these could be thrown up or cause
damage to the chain or serious injury to the operator
or bystanders
! keeparunningchainclearofwirefencingorthe
ground
- length cuts must be carried out with care, as leverage
with gripping teeth V 2 is not possible; saw at a at
angle to avoid kickback
- there is a high risk of accidents when sawing wood,
branch or trees under tension; be extremely careful
(leavesawjobslikethesetoprofessionalsl)
• Bucking a log (cutting a log into lengths)
- when possible, the log should be raised and supported
by the use of limbs, logs or chocks
- it is important to make sure your footing is rm and
your weight is evenly distributed on both feet
- when the log is supported along its entire length as
illustrated, it is cut from the top (overbuck) ^a
- when the log is supported on one end as illustrated,
cut 1/3 the diameter from the underside (underbuck);
then make the nished cut by overbucking to meet the
rst cut ^b
- when the log is supported on both ends as illustrated,
cut 1/3 the diameter from the top (overbuck); then
make the nished cut by underbucking the lower 2/3 to
meet the rst cut ^c
- when bucking on a slope always stand on the uphill
side of the log
- when “cutting through”, to maintain complete control
release the cutting pressure near the end of the cut
without relaxing your grip on the chain saw handles
! donotletthechaincontacttheground
- after completing the cut, wait for the saw chain to stop
before you move the chain saw
- always stop the motor before moving from tree to tree

Содержание

Похожие устройства

the chain life of the saw chain mainly depends upon sufficient lubrication and correct tensioning avoid tensioning the chain if it is hot as this will cause the chain to become overtensioned when it cools down Lubrication Chain life and cutting capacity depend on optimum lubrication therefore the chain is automatically oiled during operation via oil outlet L the chain saw is not supplied filled with oil It Is essential to fill with oil before use I never operate the chain saw without chain oil or at an empty oil reservoir level as this will result In extensive damage to the product set chain saw on any suitable surface with oil reservoir cap M facing upward unscrew cap and add chain saw oil not included until reservoir is full avoid dirt or debris entering oil reservoir mount oil reservoir cap and tighten I check oil level prior to starting and regularly during operation refill oil when oil level is below indicator N the oil reservoir filling will last approx 15 minutes depending on sawing intensity and stops never use recyded old oil Cord restraint hook the loop in the extension cord over restraint P as illustrated pull tight to secure the extension cord On off switch on tool by first pressing safety switch Q and then pulling trigger switch R switch off the tool by releasing trigger R I do not stop chain saw after sawing by activating front hand guard S kickback brake Kickback brake The kickback brake is a safety mechanism activated through front hand guard S when kickback occurs chain stops immediately The fol low ng function check should be carried out at regular intervals push front hand guard S forward and start the chain saw the chain must not start to deactivate the kickback brake release trigger switch R and pull hand guard S backwards Operating the tool always hold the chain saw firmly with both hands front hande T with the left hand and rear handle U with the right hand never operate chain saw using only one hand a ensure power cord is located to the rear away from the chain and wood and so positioned that it will not be caught on branches or the like during cutting the chain must be running at full speed before It makes contact with the wood use metal gripping teeth V to secure the saw onto the wood before starting to cut a use the gripping teeth as a leverage point J while cutting a reset the gripping teeth at a lower point when sawing thicker logs by pulling the chain saw slightly backwards until the gripping teeth release and reposition at a lower level to continue sawing do not remove the saw completely from the wood do not force the chain while cutting let the chain do the work using gripping teeth V to apply minimum leverage pressure use the chain saw only with secure footing hold the chain saw at the right hand side of your body b do not operate the chain saw with arms fully extended or attempt to saw areas which are difficult to reach or on a ladder c never use the chain saw above shoulder height d sawing is optimized when the chain speed remains steady during cutting I beware when reaching the end of the cut the weight of the saw may change unexpectedly as It cuts free from the wood accidents may occur to legs and feet I always remove the saw from a wood cut while the saw is running Cutting logs support logs so that the face sides at the cut do not close in against each other which would result in the chain being jammed or pinched position and set short logs safely prior to sawing when sawing always take care to avoid hitting stones nails etc as these could be thrown up or cause damage to the chain or serious injury to the operator or bystanders I keep a running chain clear of wire fencing or the ground length cuts must be carried out with care as leverage with gripping teeth V is not possible saw at aflat angle to avoid kickback there is a high riskof accidents when sawing wood branch or trees under tension be extremely careful leave saw jobs like these to professionals Bucking a log cutting a log into lengths when possible the log should be raised and supported by the use of limbs logs or chocks it is important to make sure your footing is firm and your weight is evenly distributed on both feet when the log is supported along its entire length as illustrated it is cut from the top overbuck a when the log is supported on one end as illustrated cut 1 3 the diameter from the underside underbuck then make the finished cut by overbucking to meet the first cut b when the log is supported on both ends as illustrated cut 1 3 the diameter from the top overbuck then make the finished cut by underbucking the lower 2 3 to meet the first cut c when bucking on a slope always stand on the uphill side of the log when cutting through to maintain complete control release the cutting pressure near the end of the cut without relaxing your grip on the chain saw handles I do not let the chain contact the ground after completing the cut wait for the saw chain to stop before you move the chain saw always stop the motor before moving from tree to tree 12

Скачать