Focusrite RedNet PCIe R Card [43/66] Rednet 6

7. MADI Clock Source Indicators:

• • REDNET – illuminates to indicate the internal network sync clock is in use.

• • MADI INPUT – illuminates to indicate an external MADI sync clock is in use.

• • WORD CLOCK – illuminates to indicate an external Word Clock sync clock is in use.

8. MADI Status Indicators:

• • SRC – illuminates to indicate sample rate conversion is active.

• • O/P VARISPEED – illuminates to indicate output is operating in varispeed mode. The

Output Varispeed indicator will ﬂash to indicate that the output is out of MADI tolerance

(beyond 1% of nominal), or if ‘MADI follow Rx’ is set and an invalid input is detected. Please

note that when running in varispeed mode the channel count of the MADI output will be

decreased. Please see the speciﬁcations table on page 48 for full details.

Rear Panel

9. AC mains – standard IEC receptacle for connection of AC mains. RedNet 6 has a ‘Universal’

PSU, enabling it to operate from any supply voltages between 100 V and 240 V.

10. Ethernet – RJ45 network socket. Use a standard computer network cable to connect this

socket to a local Ethernet switch to connect the RedNet 6 to the RedNet network. The socket

has integral LEDs which illuminate to indicate connection to an active network port, and

network activity. See page 46 for connector details.

11. MADI Output – BNC coaxial

12. MADI Input – BNC coaxial

13. MADI Output – Duplex SC optical (see p.48 for more details)

14. MADI Input – Duplex SC optical (see p.48 for more details)

15. Word Clock Output – BNC coaxial

16. Word Clock Input – BNC coaxial

Note: Word Clock Input can provide a clock source for the SRC or the network. Additionally when

MADI and network are running synchronously Word Clock Input can accept a base-rate word

clock signal.

9 10

11 12 13 14 15 16

REDNET 6