First 5476-2 [3/34] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

First 5476-2 [3/34] English

First 5476-2 [3/34] English
4 5
ENGLISH
HOT WATER DISPENSING
1. Press the power button to turn the unit on.
2. When preheating is completed, the coee
indicator lights up constantly.
3. Place a jug or cup below the steam nozzle
and turn the steam control knob to the “hot
water” symbol at the max position.
4. Press the coee button to let the machine
dispense hot water through the steam nozzle.
5. Press the coee button again to stop
dispensing and turn the steam control knob
to the “O” position.
AUTOMATIC POWER OFF FUNCTION
If there is no operation within 25 minutes, the
unit will switch o automatically.
CLEANING & MAINTENANCE
1. Unplug the espresso maker and allow it to
cool completely before cleaning.
2. Clean the housing, water tank, and drip tray
with a damp cloth or sponge, then dry them.
3. Detach the portalter by turning it clockwise,
remove all coee residues inside, clean it with
detergent and rinse it thoroughly with water.
4. Clean all attachments in water and dry them.
Caution: Do not clean with alcohol or solvent
cleaner. Never immerse the housing in water.
DESCALING / CLEANING MINERAL
DEPOSITS
A descaling prompt will occur automatically
after working for 500 cycles. In this case,
all indicators will quickly ash 5 times after
preheating is nished.
1. Fill the tank with water and descaler to the
MAX level. Please refer to the instructions of
your descaler for the correct mixing ratio.
2. Repeat the steps 2 – 8 of the chapter “BEFORE
FIRST USE” until the water tank is empty.
3. Rinse out the water tank thoroughly and rell
it with clean water.
4. Repeat the steps 2 – 8 of the chapter “BEFORE
FIRST USE” at least 3 times to remove the
remaining descaler.
Reset descaling warning:
After you have nished descaling, press and hold
the “coee” + “steam” buttons simultaneously
for 3 seconds to reset the descaling warning. All
indicators will ash 3 times to conrm that the
reset was successful.
TECHNICAL SPECIFICATIONS:
220-240 V • 50-60 Hz • 850 W
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local
regulations: hand in the non-working electrical
equipment to an appropriate waste disposal
center.
ENGLISH
TROUBLESHOOTING
Symptoms Check / possible Reasons Actions
Water leaks from
the bottom of
espresso maker.
There is too much water in the drip
tray.
Please clean the drip tray.
The coee maker is malfunction. Please contact customer service.
Water leaks out
from the outer side
of the lter.
There might be some coee powder
on the lter edge.
Clean the lter from coee powder
Espresso coee has
a sour taste (e.g.
vinegar).
Not rinsed properly after descaling. Rinse the espresso maker with hot water as
described in the chapter “BEFORE FIRST USE” for
several times.
The ground coee was stored in a
warm, wet place for a long period of
time. The coee turned bad.
Please use fresh ground coee and store unused
coee in a cool, dry place. After opening a package
of ground coee, reseal it tightly and store it in a
refrigerator to maintain its freshness.
The coee maker
doesn’t work
anymore.
Check that the power cord is properly
plugged into the power outlet.
Plug the power cord correctly into the wall outlet,
if the appliance still does not work, please contact
customer service.
The steam cannot
froth the milk.
The steam indicator does not light up
constantly.
Only after the steam indicator stops ashing and
lights up constantly, the steam can be used to froth
milk.
The jug/cup is too big or the shape
does not t.
Use a high and narrow jug/cup.
You have used skimmed milk. Use whole milk for better results.
All indicators
ashing 5 times
after preheating.
Descaling required. Perform the “DESCALING” action.
The coee indicator
is ashing quickly.
The boiler temperature is too high. Perform the “HOT WATER DISPENSING” action to
reduce the boiler temperature.

Содержание

Похожие устройства

Скачать