Home
Главная
Maxwell
Утюги
MW-3007
Руководство по эксплуатации Страница: 12

Maxwell MW-3007 [12/36] English

ENGLISH

• When the soleplate (13) reaches the set tem-

perature, the pilot lamp (7) will go out, you

can start ironing.

• Turn the continuous steam supply knob (3) to

the position or , steam will start going

out from the soleplate (13) openings.

• After you finish ironing, set the temperature

control knob (11) to the position «OFF», and

the continuous steam supply knob (3) to the

position – steam supply is off.

• Pull the power plug out of the mains socket

and let the iron cool down completely.

ATTENTION!

If the steam is not constantly supplied during

operation, check whether the temperature con-

trol knob (11) is set properly and there is water in

the water tank (10).

BURST OF STEAM

The burst of steam function is useful for ironing

folds and can only be used at high ironing tem-

peratures (when the iron temperature control

knob (11) is set to the position «••» or «•••»).

• When pressing the burst of steam button (4)

steam will go out of the iron soleplate more

intensively.

Note: To avoid water leakage from steam open-

ings, press the burst of steam button (4) with an

interval no less than 4-5 sec.

VERTICAL STEAM

Vertical steam function can be used only at high

ironing temperatures (that is, when the tempera-

ture control knob (11) is set to «••» or «•••»).

Hold the iron vertically at the distance of

10-30 cm from the clothes and press the burst

of steam button (4) with 4–5 second intervals,

steam will be released from the soleplate (13)

intensively.

IMPORTANT INFORMATION: Vertical steaming

is not recommended for synthetic fabrics.

• To avoid fabric melting, do not touch it with

the iron soleplate while steaming.

• Never steam clothes on a person as the

steam temperature is very high, use a clothes

hanger or a coat rack.

• After you finish ironing, switch the unit off,

wait until it cools down completely, then open

the water inlet lid (2), turn over the iron and

pour out the remaining water.

STEAM CHAMBER CLEANING

To prolong lifetime of the iron we recommend

cleaning the steam chamber regularly.

• Set the continuous steam supply knob (3) to

the position .

• Fill the water tank (10) up to the maximal mark

«MAX».

• Place the iron on its base (9).

• Insert the power plug into the mains socket.

• Set the control knob (11) to the maximum

soleplate temperature «•••», the indica-

tor (7) will light up.

• When the soleplate (13) reaches the desired

temperature value, the indicator (7) will go

out, you can start cleaning.

• Switch the iron off setting the tempera-

ture control knob (11) to the «OFF» position

(SWITCHED OFF). Remove the power plug

from the mains socket.

• Place the iron horizontally above the sink, set

the continuous steam supply knob (3) to the

position «self-clean» (utmost left position).

• Boiling water and steam with scale will be

released from the iron soleplate (13) openings.

• Slightly sway the iron back and forth, until all

the water leaves the water tank (10).

• Release the continuous steam supply knob

(3) and set it to the position .

• Place the iron on its base (9) and let it cool

down completely.

• When the soleplate (13) cools down com-

pletely, wipe it with a dry cloth.

• Before you take the iron away for storage,

make sure that there is no water in the water

tank (10) and that the iron soleplate (13) is

completely dry.

CLEANING AND CARE

• Before cleaning the iron, make sure that it is

unplugged and has cooled down completely.

• Wipe the iron body with a slightly damp cloth

and then wipe it dry.

• Scale on the iron soleplate can be removed

with a cloth soaked in vinegar-water solution.

• After removing scale, polish the soleplate

surface with a dry cloth.

• Do not use abrasives to clean the iron sole-

plate and body.

• Avoid contact of the iron soleplate with sharp

metal objects.

Maxwell MW-3007 [12/36] English

Содержание

Похожие устройства