Tc Electronic G-FORCE [34/63] The tuner display

The Tuner display

When pressing the Tuner key, you access the Tuner

display. In the Tuner display, you have four setup

parameters. Entering the Tuner display also activates

the Tuner guides on both the Billboard and the Gain

reduction meters.

Tuning Note

With this parameter you can either choose the Detect

mode or you can manually select which note you want to

tune. When the tuner is set to Detect it will automatically

sense what note you are playing. This will be indicated on

the Billboard together with two arrows showing you

whether you are a bit flat or sharp. At the same time the

gain reduction meters will indicate how much you are out of

tune. When the two center LEDs are lit, you are in tune.

Master tune

With the Master tune parameter you can calibrate the

tuner.

Note: The Master Tune controls the pitch detector, meaning

that the tuning of the Pitch voices will change with the

Master tune.

Show always

When “Show Always” is on, the Billboard will show the

Tuner constantly. This allows you to always be able to turn

around and see if you are in tune. This parameter is also

available in Utility.

Mute in Tuner

This parameter enables you to mute the outputs of the G-

Force when the Tuner is activated. This means that you

Choose Detect or manual note selection

Master Tune

Mute when Tuner is active

Billboard is always Tuner

TUNER

can tune your guitar on stage with no sound at all. The

sound will only be muted while the tuner display is active.

Tuner activated via pedal/MIDI

The Tuner can be activated via the External input jack on

the back panel of the G-Force or via MIDI. That is setup in

the I/O Setup, Control display.