Konica Minolta bizhub PRESS 2250P Инструкция по эксплуатации онлайн [50/315] 115412

bizhub PRESS 2250P 5-12

5.2 Windows Vista/Server 2008/Server 2008 R2/7

4 Click [Add a network, wireless or Bluetooth printer].

Connected printers are detected.

% If no printer is detected, turn this machine off, then on again.

In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again.

If you turn this machine on immediately after turning it off, it may not function correctly.

5 Select this machine from the list, and then click [Next].

% To use the LPR/Port 9100 protocol, select the printer with its IP address.

% To use the SMB connection, select the printer with its "\\NetBIOS name\print service name". You

can check the NetBIOS name and print service name by selecting [Administrator Setting] - [Network

Setting] - [Controller NIC Set. (Body 1)] - [SMB Setting] - [Print Setting]. In the default setting, the

last six characters of the NetBIOS name correspond to the low-order three bytes of the MAC ad-

dress.

To check the MAC address, select [Configuration Page]. For details on how to output [Configuration

Page], refer to page 15-4.

% For the SMB connection, click [Next], and then click [OK] in the [Connect to Printer] page that ap-

pears.

% It may take some time to finish searching the entire list of printers.