Dell 7510 (7510-9822) [14/57] Installing the keyboard

a. Pry the keyboard trim starting from bottom and work along the top edge and remove it away from the computer [1, 2, 3].

b. Remove the screws that secure the keyboard to the computer [4].

c. Lift the front side and slide the keyboard to remove it away from the computer [5].

Installing the keyboard

1. Press and align the keyboard to its compartment.

2. Tighten the screws to secure the keyboard to the computer.

3. Slide in the keyboard trim from the front and align it to its position on the computer. Ensure that the keyboard trim clicks into

its place

4. Connect the keyboard-data cable to the system board.

NOTE: Ensure that you fold the keyboard-data cable in perfect alignment.

5. Affix the tape on the keyboard data cables.

6. Install the:

a. hard drive

b. battery

c. battery cover

7. Follow the procedure in After working inside your computer.

Removing the secondary memory

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a. battery cover

b. battery

c. hard drive

d. keyboard

3. Perform the following steps as shown in the illustration:

a. Remove the screw that secures the memory shield to the computer [1].

b. Lift and remove the memory shield from the computer [2].

c. Pry the retention clips away from the memory module until it pops up [3].

d. Lift the memory module and remove it from the computer [4].