Dell 7510 (7510-9822) [16/57] Installing the primary memory

Installing the primary memory

1. Insert the primary memory into the memory socket.

NOTE: Install either two or four memory modules in the memory module slots to ensure optimum system

performance. Installing one or three memory modules lead to system performance issues.

2. Press the clips to secure the primary memory to the system board.

3. Install the:

a. base cover

b. battery

c. battery cover

4. Follow the procedure in After working inside your computer.

Removing Wireless Wide Area Network (WWAN) card (Optional)

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a. battery cover

b. battery

c. base cover

3. Please perform the following steps to remove the WWAN card:

a. Disconnect and remove the antenna cables connected to the WWAN card [1].

b. Remove the screw that secures the WWAN card to the computer [2].

c. Remove the WWAN card from the computer [3].

Installing the WWAN card (Optional)

1. Slide the WWAN card in the WWAN card slot.

2. Tighten the screw to secure the WWAN card to the computer.

3. Route the antenna cables through the routing channels and connect them to the WWAN card.

4. Install the:

a. base cover

b. battery

c. battery cover

5. Follow the procedure in After working inside your computer