Trotec SpeedMarker 300 [27/51] Transport and unloading

SpeedMarker 300

8037 | V 2.1_EN (01/2016)

27/ 51

Transport and unloading

Unless otherwise agreed, the machine is delivered in a packaging case.

Only use the original packaging case if you need to transport the SpeedMarker 300.

CAUTION

During transport the transport case can slip, tip or fall over.

Always secure the transport case and take into account the center of gravity of the box.

Transport inspection and reporting faults

CAUTION

The marking head is connected to the actual laser source in the laser rack via an approx. 2.1 m long

fibre optic cable. The fiber optic cable is enclosed with the jumper cables in a black protective tube for

protection. Avoid any unnecessary stretching or bending by a radius more than 70 mm of the

fiber optic cable. This could damage the fiber optic cable.

CAUTION

The lens unit should only be uncovered following installation. The lenses are high quality optical com-

ponents which must be kept clean in order to ensure optimum marking results.

Never touch the lenses with bare fingers!

Upon arrival, inspect the delivery to ensure that it is complete and has not suffered any damage. If any transport

damage is visible, do not accept the delivery or only accept it with reservation. Record the scope of the damage on

the transport documents/delivery note. Initiate the complain process. For all defects that are not discovered upon

delivery, be sure to report them as soon as they are recognized as damage claims must be filed within a certain

period, as granted by law.

Unpack the machine

Only trained and authorised personnel are permitted to transport and unpack the machine.

To avoid that any wooden parts are falling off or the machine is tipping, be very careful when opening the transport

case.

1. Position the transport case on level ground.

2. Remove the vertical tightening straps.

3. Remove the top of the transport case.

Center of gravity

Tilt

Shockwatch