Metabo SPA 1702 W — инструкция по сборке: установка основания и колес [13/60]

6 Assembly

6.1 Base

Set up the column (16) with the recess down.

Position the base-plate (14) and secure with

5 M6x16 hexagonal socket-head screws,

6.4 washers and M6 hexagonal nuts as

illustrated. To tighten threaded connections,

use a 10 mm AF box spanner and a 4 mm AF

Allen key for hexagonal socket-head screws.

6.2 Castors and wheels

Locate 8.4 washer on the grub screw on the

castor (13). Push castor (13) with its washer

fitted into the holes drilled for the purpose in

the base-plate (14).

Fit 8.4 washer and M8 hexagonal nut. Tighten

hexagonal nut with a 13 mm AF open-ended

spanner while holding the castor in position

with a second 13 mm AF spanner.

Fit wheel (15) with two 8.4 washers to the

M8x60 hexagonal-head screw and tighten the

M8 hexagonal nut so that the wheel (15) turns

easily in its location between the washers on

the hexagonal-head screw. Fit the 8.4 washer

onto the hexagonal-head screws with the

wheel (15) fitted in place. Insert the hexagonal-

head screw through the lateral holes drilled in

the base-plate (14) and secure with the

8.4 washer and M8 hexagonal nut. Press the

cover into place on the wheel until it can be

heard clicking into place (see illustration).

6.3 Suction unit

Locate the column (16) with base-plate on the

wheels. Place the suction unit (6) on the

column (16) and align. Insert 4 M6x16

hexagonal socket-head screws through the

holes drilled for the purpose at the top and

tighten with a 4 mm AF Allen key.

15 15

ENGLISH