Home
Главная
Hitachi
Дрель
FD10VB
Инструкция по эксплуатации Страница: 6

Hitachi FD10VB [6/41] English

English

(2) How to drill

1 To use for drilling lumber

䡬 Apply the point of the drill bit to the desired drilling

position, hold the drill perpendicular to the

workpiece surface and turn on the switch.

䡬 When drilling a through hole in lumber, remove the

drill from the material as soon as the tip of the drill

bit protrudes from the opposite surface. Then, turn

the workpiece over and complete the drilling from

the opposite side to obtain a clean hole. (Fig. 4)

If extra lumber is applied under the lumber you

want to drill and it is drilled together, a fine hole

will also be made. (Fig. 5)

䡬 A wood-working drill need not be pressed strongly

since it penetrates using the screw at the point.

Even if excessive force is used, a hole will not be

made quickly.

2 To use for drilling metal

䡬 In case you drill metal with a metal-working drill,

apply in advance a center punch in the drilling

position. You can drill metal stably since the point

of the drill does not slip.

䡬 If you apply sewing machine oil or soapy water to

the drill with a brush or an old tooth brush, the

drill will last long.

䡬 Even if more-than-necessary force is used, a hole

will not be made quickly.

On the contrary, the edge of the drill will be

damaged. This will decrease operational efficiency

and shorten the life of this tool.

CAUTION:

Do not expose the motor to water as it may cause

motor malfunction and electric shock.

5. To use the driving wood screws (FD10VB)

(1) Driver bit

䡬 For driving a slotted head wood screw, the driver

bit detaches easily. So use cross-recessed head

wood screws as often as possible.

䡬 Select a driver bit matching the cross-recessed and

the slotted groove of the wood screw.

(2) Pilot hole

If a pilot hole is made with a drill a little smaller than

the diameter of the wood screw, the lumber will not

be split and the wood screw will be driven with ease.

(3) Driving operation

Put the wood screw lightly in the pilot hole, apply

the bit to the screw head groove, turn on the switch

and drive the screw.

6. Caution to be taken immediately after operation

When placing the drill in dusty places before the

rotating parts has stopped completely, make sure

the machine does not suck in dust and swarf.

MAINTENANCE AND INSPECTION

CAUTION

Be sure to switch power OFF and disconnect the plug

during maintenance and inspection.

1. Inspecting the drill bits and driver bit

Since use of an abraded drill bit will cause motor

malfunctioning and degraded efficiency, replace the

drill bit with a new one or resharpening without delay

when abrasion is noted. If you use a driver bit of

which point is worn or broken, it will be dangerous

since it slips. So replace it with a new one.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure

that they are properly tightened. Should any of the

screws be loose, retighten them immediately. Failure

to do so could result in serious hazard.

3. Servicing

Consult a Hitachi Authorized Service Center in the

event of power tool failure.

4. Service parts list

A: Item No.

B: Code No.

C: No. Used

D: Remarks

CAUTION

Repair, modification and inspection of Hitachi Power

Tools must be carried out by a Hitachi Authorized

Service Center.

This Parts List will be helpful if presented with the

tool to the Hitachi Authorized Service Center when

requesting repair or other maintenance.

In the operation and maintenance of power tools,

the safety regulations and standards prescribed in

each country must be observed.

MODIFICATION

Hitachi Power Tools are constantly being improved

and modified to incorporate the latest technological

advancements.

Accordingly, some parts (i.e. code numbers and/or

design) may be changed without prior notice.

GUARANTEE

We guarantee Hitachi Power Tools in accordance with

statutory/country specific regulation. This guarantee does

not cover defects or damage due to misuse, abuse, or

normal wear and tear. In case of complaint, please send

the Power Tool, undismantled, with the GUARANTEE

CERTIFICATE found at the end of this Handling instruction,

to a Hitachi Authorized Service Center.

NOTE

Due to HITACHI’s continuing program of research and

development, the specifications herein are subject to

change without prior notice.

Содержание

Похожие устройства

English 2 How to drill j To use for drilling lumber O Apply the point of the drill bit to the desired drilling position hold the drill perpendicular to the workpiece surface and turn on the switch O When drilling a through hole in lumber remove the drill from the material as soon as the tip of the drill bit protrudes from the opposite surface Then turn the workpiece over and complete the drilling from the opposite side to obtain a clean hole Fig 4 If extra lumber is applied under the lumber you want to drill and it is drilled together a fine hole will also be made Fig 5 O A wood working drill need not be pressed strongly since it penetrates using the screw at the point Even if excessive force is used a hole will not be made quickly To use for drilling metal O In case you drill metal with a metal working drill apply in advance a center punch in the drilling position You can drill metal stably since the point of the drill does not slip O If you apply sewing machine oil or soapy water to the drill with a brush or an old tooth brush the drill will last long O Even if more than necessary force is used a hole will not be made quickly On the contrary the edge of the drill will be damaged Thiswill decrease operational efficiency and shorten the life of this tool CAUTION Do not expose the motor to water as it may cause motor malfunction and electric shock 5 To use the driving wood screws FD10VB 1 Driver bit O For driving a slotted head wood screw the driver bit detaches easily So use cross recessed head wood screws as often as possible O Select a driver bit matching the cross recessed and the slotted groove of the wood screw 2 Pilot hole If a pilot hole is made with a drill a little smaller than the diameter of the wood screw the lumber will not be split and the wood screw will be driven with ease 3 Driving operation Put the wood screw lightly in the pilot hole apply the bit to the screw head groove turn on the switch and drive the screw 6 Caution to be taken immediately after operation When placing the drill in dusty places before the rotating parts has stopped completely make sure the machine does not suck in dust and swarf 2 Inspecting the mounting screws Regularly inspect all mounting screws and ensure that they are properly tightened Should any of the screws be loose retighten them immediately Failure to do so could result in serious hazard 3 Servicing Consult a Hitachi Authorized Service Center in the event of power tool failure 4 Service parts list A Item No B Code No C No Used D Remarks CAUTION Repair modification and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance In the operation and maintenance of power tools the safety regulations and standards prescribed in each country must be observed MODIFICATION Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancem ents Accordingly some parts i e code numbers and or design may be changed without prior notice GUARANTEE We guarantee Hitachi Power Tools in accordance with statutory country specificregulation This guaranteedoes not cover defects or damage due to misuse abuse or normal wear and tear In case of complaint please send the Power Tool undismantled with the GUARANTEE CERTIFICATEfound at theend of this Handling instruction to a Hitachi Authorized Service Center NOTE Due to HITACHI S continuing program of research and development the specifications herein are subject to change without prior notice MAINTENANCE AND INSPECTION CAUTION Be sure to switch power OFF and disconnect the plug during maintenance and inspection 1 Inspecting the drill bits and driver bit Since use of an abraded drill bit will cause motor malfunctioning and degraded efficiency replace the drill bit with a new one or resharpening without delay when abrasion is noted If you use a driver bit of which point is worn or broken it will be dangerous since it slips So replace it with a new one 5

Скачать