Bosch GTS 10 J (0601B30500) [28/355] Symbols
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bosch GTS 10 J (0601B30500) [28/355] Symbols

Bosch GTS 10 J (0601B30500) [28/355] Symbols
28 | English
1 619 929 J53 | (12.5.11) Bosch Power Tools
Safety Warnings for Table Saws
f Never stand on the power tool. Serious injuries can occur
when the power tool tips over or when inadvertently com-
ing into contact with the saw blade.
f Take care that the blade guard operates properly and
can move freely. Always adjust the blade guard in such a
manner that it faces loosely against the workpiece when
sawing. Never clamp the blade guard when it is open.
f Keep hands away from the cutting area while the ma-
chine is running. Danger of injury when coming in contact
with the saw blade.
f Never reach behind the saw blade in order to hold the
workpiece, remove saw dust/wood chips or for any oth-
er reason. The clearance of your hand to the rotating saw
blade is too small.
f Guide the workpiece against the saw blade only when
the machine is switched on. Otherwise there is damage
of kickback, when the saw blade becomes wedged in the
workpiece.
f Keep handles dry, clean, and free from oil and grease.
Greasy, oily handles are slippery causing loss of control.
f Operate the power tool only when the work area to the
workpiece is clear of any adjusting tools, wood chips,
etc. Small pieces of wood or other objects that come in
contact with the rotating saw blade can strike the operator
with high speed.
f Only saw one workpiece at a time. Workpieces placed on
top or aside of each other can cause the saw blade to jam
or the workpieces to move against each other while saw-
ing.
f Always use the parallel guide or the angle guide. This
improves the cutting accuracy and reduces the possibility
of saw blade binding.
f Use the machine for grooving or rebating only with an
appropriately suitable protective device (e. g. a tunnel
blade guard).
f Do not use the machine for cutting slots (stopped
grooves).
f Use the machine only for cutting the materials listed
under Intended Use. Otherwise, the machine can be sub-
ject to overload.
f If the saw blade should become jammed, switch the ma-
chine off and hold the workpiece until the saw blade
comes to a complete stop. To prevent kickback, the
workpiece may not be moved until after the machine
has come to a complete stop. Correct the cause for the
jamming of the saw blade before restarting the machine.
f Do not use dull, cracked, bent or damaged saw blades.
Unsharpened or improperly set saw blades produce nar-
row kerf causing excessive friction, blade binding and kick-
back.
f Always use saw blades with correct size and shape (dia-
mond versus round) of arbor holes. Saw blades that do
not match the mounting hardware of the saw will run ec-
centrically, causing loss of control.
f Do not use high speed steel (HSS) saw blades. Such saw
blades can easily break.
f Do not touch the saw blade after working before it has
cooled. The saw blade becomes very hot while working.
f Never operate the machine without the insert plate.
Replace a defective insert plate. Without flawless insert
plates, injuries are possible from the saw blade.
f Check the cable regularly and have a damaged cable re-
paired only through an authorised customer service
agent for Bosch power tools. Replace damaged exten-
sion cables. This will ensure that the safety of the power
tool is maintained.
f Store the machine in a safe manner when not being
used. The storage location must be dry and lockable.
This prevents the machine from storage damage, and from
being operated by untrained persons.
f Never leave the machine before it has come to a com-
plete stop. Cutting tools that are still running can cause in-
juries.
f Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when
the cable is damaged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbols and their meaning
Keep hands away from the cutting area
while the machine is running. Danger of
injury when coming in contact with the saw
blade.
Wear a dust respirator.
OBJ_BUCH-1325-002.book Page 28 Thursday, May 12, 2011 1:51 PM

Содержание

Похожие устройства

OBJ BUCH 1325 002 book Page 28 Thursday May 12 2011 1 51PM 281 English Safety Warnings for Table Saws Do not use high speed steel HSS saw blades Such saw Never stand on the power tool Seriousinjuriescan occur when the power tool tips over or when inadvertently com cooled Thesaw blade becomes very hotwhile working ing into contact with the saw blade Takecarethat the bladeguard operates properly and can move freely Always adjust the blade guard in such a manner that it faces loosely against the workpiece when sawing Never clamp the blade guard when it is open Never operate the machine without the insert plate Replacea defective insert plate Without flawless insert plates injuries are possible from thesaw blade Check the ca bl e r egu la dy a nd ha ve a da maged cabl e re Keep ha nds a way from the cutting area while the ma chine is running Danger of injury when coming in contact with the saw blade Never reach behind the saw blade in order to hold the workpiece remove sa w dust wood chips or for a ny oth er reason The clearance of your hand to the rotating saw blade is too small Guide the workpiece against the saw blade only when the machine is switched on Otherwise there is damage of kickback when thesaw blade becomes wedged in the workpiece Keep handles dry clean and free from oil and grease Greasy oily handles are slippery causing loss of control Operate the power tool only whentheworkarea to the wor kpiece i s cl ea r of a ny a dju st ing tool s wood chi ps paired only through an authorised customer service agent forBosch power tools Replacedamaged exten sion cables This will ensure that the safety of the power tool is maintained Storethemachine ina safe manner when not being used The storage location must be dry and lockable This prevents themachine from storage damage and from being operated by untrained persons Never leave the machine before it has come to a com plete stop Cutting tools that are still running can cause in juries Never use the machine with a damaged cable Do not touch theda maged cableand pull themainsplug when the cable is damaged while working Damaged cables in crease the risk of an electric shock etc Small pieces of wood or other objects that come in contactwith the rotating saw blade can strike the operator Products sold in GB only Your product is fitted with a BS1363 A approved electric plug with internal fuse ASTA with high speed approved to BS 1362 Only sa w one workpiece at a t me Workpi eces placed on top or aside of each other can cause the saw blade tojam or the workpieces to move against each other whil e saw ing blades can easily break Do not touch the saw blade after working before it has Alwaysusetheparallelguideortheangleguide This improves the cutting accuracy and reduces the possibility of saw blade binding Use the machi ne for grooving or rebati ng only with an appropriately suitable protective device e g a tunnel blade guard Do not use the machine for cutting slots stopped grooves Use the machi ne only for cutting the materials listed under Intended Use Otherwise the machine can be sub ject to overload If the saw blade should become jammed switch the ma chine off and hold the workpiece until thesaw blade comes to a complete stop To prevent kickback the workpiece may not be moved until after the machine has come to a complete stop Correct the cause for the jamming of the saw blade before restarting the machine Do not use dull cracked bent or damaged saw blades Unsharpened or improperly set saw blades produce nar row kerf causing excessive friction bl ade bi ndi ng and ki ck I f the plug is not sui table for your socket outlets 11 shoul d be cut off and an appropriate plug fitted in its place by an author ised customer service agent The replacement plug should have the same fuse rating as the original plug The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains sock et elsewhere Products sold in AUS and NZ only Use a residual current de vice RCD with a rated residual current of 30 mA or less Symbols The following symbols can be important for the operation of your power tool Please memorise the symbols and their meanings The correct interpretation of the symbols helps you operate the power tool better and more secure Symbolsand their meaning Keep handsaway from thecuttingarea whilethe ma chine is running Danger of injury when comingin contact with thesaw blade Wear a dust respirator back Al ways use sa w blades with correct size a nd sha pe dia mond versus round of arbor holes Saw blades that do not match the mounting hardware of the saw will run ec centrically causing loss of control 1619 929 J531 12 5 11 Bosch Power Tools

Скачать