Husqvarna 580BTS [13/458] Вдв

Husqvarna 580BTS [13/458] Вдв
FUEL HANDLING
English 13
1154033-38 Rev.2 2011-08-01
Fuel
CAUTION! The machine is equipped with a two-stroke
engine and must always been run using a mixture of
petrol and two-stroke oil. It is important to accurately
measure the amount of oil to be mixed to ensure that the
correct mixture is obtained. When mixing small amounts
of fuel, even small inaccuracies can drastically affect the
ratio of the mixture.
Petrol
CAUTION! Always use a good quality petrol/oil mixture (at
least 90 octane).
The lowest recommended octane rating is 90. If you
run the engine on a petrol with a lower octane rating
than 90 this can cause knocking. This leads to an
increased engine temperature, which can result in
serious engine damage.
When working at continuous high revs a higher octane
rating is recommended. Use good quality unleaded petrol.
Two-stroke oil
For best results and performance use HUSQVARNA
two-stroke oil, which is specially formulated for our
two-stroke engines. Mixture 1:50 (2%).
If HUSQVARNA two-stroke oil is not available, you
may use another two-stroke oil of good quality that is
intended for air cooled engines. Contact your dealer
when selecting an oil. Mixing ratio 1:33 (3%).
Never use two-stroke oil intended for water-cooled
outboard engines, sometimes referred to as outboard oil.
Never use oil intended for four-stroke engines.
Mixing
Always mix the petrol and oil in a clean container
intended for fuel.
Always start by filling half the amount of the petrol to be
used. Then add the entire amount of oil. Mix (shake) the
fuel mixture. Add the remaining amount of petrol.
Mix (shake) the fuel mixture thoroughly before filling
the machine’s fuel tank.
Do not mix more than one month’s supply of fuel at a
time.
If the machine is not used for some time the fuel tank
should be emptied and cleaned.
Fuelling
Move the machine at least 3 m from the refuelling
point before starting it.
Clean the area around the fuel cap. Contamination in
the tank can cause operating problems.
Ensure that the fuel is well mixed by shaking the
container before filling the tank.
!
WARNING! Always ensure there is
adequate ventilation when handling fuel.
Petrol, litre
Two-stroke oil, litre
2% (1:50) 3% (1:33)
5 0,10 0,15
10 0,20 0,30
15 0,30 0,45
20 0,40 0,60
!
WARNING! Taking the following
precautions, will lessen the risk of fire:
Refuel in a well ventilated area. Never fuel
the machine indoors.
Do not smoke or place hot objects near
fuel.
Always shut off the engine before
refuelling.
Always stop the engine and let it cool for a
few minutes before refuelling.
When refuelling, open the fuel cap slowly
so that any excess pressure is released
gently.
Tighten the fuel cap carefully after
refuelling.
If you have spilt fuel on it. Wipe off the
spillage and allow remaining fuel to
evaporate.
Always move the machine away from the
refuelling area and source before starting.

Содержание

Похожие устройства

FUEL HANDLING Fuel CAUTION The machine is equipped with a two stroke engine and must always been run using a mixture of petrol and two stroke oil It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained When mixing small amounts of fuel even small inaccuracies can drastically affect the ratio of the mixture Mix shake the fuel mixture thoroughly before filling the machine s fuel tank WARNING Always ensure there is adequate ventilation when handling fuel Do not mix more than one month s supply of fuel at a time lithe machine is not used for some time the fuel tank should be emptied and cleaned Petrol ВДВ Fuelling CAUTION Always use a good quality petrol oil mixture at least 90 octane The lowest recommended octane rating is 90 If you run the engine on a petrol with a lower octane rating than 90 this can cause knocking This leads to an increased engine temperature which can result in serious engine damage When working at continuous high revs a higher octane rating is recommended Use good quality unleaded petrol Two stroke oil For best results and performance use HUSQVARNA two stroke oil which is specially formulated for our two stroke engines Mixture 1 50 2 If HUSQVARNA two stroke oil is not available you may use another two stroke oil of good quality that is intended for air cooled engines Contact your dealer when selecting an oil Mixing ratio 1 33 3 Never use two stroke oil intended for water cooled outboard engines sometimes referred to as outboard oil Never use oil intended for four stroke engines Petrol litre Two stroke oil litre 2 1 50 3 1 33 5 0 10 0 15 10 0 20 0 30 15 0 30 0 45 20 0 40 0 60 WARNING Taking the following precautions will lessen the risk of fire Refuel In a well ventilated area Never fuel the machine Indoors Do not smoke or place hot objects near fuel Always shut off the engine before refuelling Always stop the engine and let It cool for a few minutes before refuelling When refuelling open the fuel cap slowly so that any excess pressure is released gently Tighten the fuel cap carefully after refuelling If you have split fuel on It Wipe off the spillage and allow remaining fuel to evaporate Always move the machine away from the refuelling area and source before starting Move the machine at least 3 m from the refuelling point before starting it Mixing Always mix the petrol and oil in a clean container intended for fuel Always start by filling half the amount of the petrol to be used Then add the entire amount of oil Mix shake the fuel mixture Add the remaining amount of petrol 11 54033 38 Rev 2 2011 08 01 Clean the area around the fuel cap Contamination in the tank can cause operating problems Ensure that the fuel is well mixed by shaking the container before filling the tank English 13

Скачать