Husqvarna 580BTS [14/458] Starting and stopping

Husqvarna 580BTS [14/458] Starting and stopping
STARTING AND STOPPING
14 – English
1154033-38 Rev.2 2011-08-01
Starting and stopping
Cold engine
Ignition: Set the stop switch to the start position. About
one third open.
It is not allowed to set the stop switch in full throttle
position.
Choke: Set the choke control in the choke position.
Primer bulb: Press the air purge repeatedly until fuel
begins to fill the bulb. The bulb need not be completely
filled.
Warm engine
Use the same starting procedure as for a cold engine but
without setting the choke control in the choke position.
Starting
Hold the body of the machine on the ground using your
left hand (CAUTION! Not with your foot!). Grip the starter
handle, slowly pull out the cord with your right hand until
you feel some resistance (the starter pawls grip), now
quickly and powerfully pull the cord.
Never twist the starter cord around your hand.
Repeat pulling the cord until the engine starts. When the
engine starts, return choke control to run position.
CAUTION! Do not pull the starter cord all the way out and
do not let go of the starter handle when the cord is fully
extended. This can damage the machine.
NOTE!
Air is released as soon as the engine is started, even
when idling.
Set the required engine speed with the throttle control.
1 Full throttle
2 About one third open.
3 Idle speed
4 Stop switch
Stopping
The engine is stopped by moving the stop switch to the
stop position.
!
WARNING! Always move the machine
away from the refuelling area and source
before starting. Place the machine on a
flat surface.
Make sure no unauthorised persons are
in the working area, otherwise there is a
risk of serious personal injury. The safety
distance is 15 metres.
The machine may only be started in its
complete design. If the machine is
started without all the guards fitted there
is a risk of personal injuries.
(4)
(3)
(2)
(1)
(4)
(3)
(2)
(1)

Содержание

Похожие устройства

STARTING AND STOPPING Starting and stopping Starting Hold the body of the machine on the ground using your left hand CAUTION Not with your foot Grip the starter handle slcwly pull out the cord with your right hand until you feel some resistance the starter pawls grip now quickly and powerfully pull the cord WARNING Always move the machine away from the refuelling area and source before starting Place the machine on a flat surface Make sure no unauthorised persons are In the working area otherwise there Is a risk of serious personal Injury The safety distance Is 15 metres The machine may only be started In Its complete design If the machine Is started without all the guards fitted there Is a risk of personal Injuries Cold engine Ignition Set the stop switch to the start position About one third open Never twist the starter cord around your hand Repeat pulling the cord until the engine starts When the engine starts return choke control to run position CAUTION Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended This can damage the machine NOTE Air is released as soon as the engine is started even when idling Set the required engine speed with the throttle control It is not allowed to set the stop switch in full throttle position Choke Set the choke control in the choke position 1 Full throttle 2 About one third open 3 Idle speed 4 Stop switch Stopping The engine is stopped by moving the stop switch to the stop position Primer bulb Press the air purge repeatedly until fuel begins to fill the bulb The bulb need not be completely filled Warm engine Use the same starting procedure as for a cold engine but without setting the choke control in the choke position 14 English 1154033 38 Rev 2 2011 08 01

Скачать