Home
Главная
Skil
Лобзики
4581 LA
Инструкция по эксплуатации Страница: 10

Skil 4581 LA Инструкция по эксплуатации онлайн [10/116] 92542

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

5) SERVICE

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR JIG SAWS

GENERAL

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool (tools with

a rating of 230V or 240V can also be connected to a

220V supply)

• Check the functioning of the tool before each use and, in

case of a defect, have it repaired immediately by a

qualied person; never open the tool yourself

• Do not work materials containing asbestos (asbestos

is considered carcinogenic)

• This tool should not be used by people under the age of

16 years

• The noise level when working can exceed 85 dB(A); wear

ear protection

• Wear protective goggles when working with materials

which produce chips

• Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

• Certain kinds of dust are classied as carcinogenic (such

as oak and beech dust) especially in conjunction with

additives for wood conditioning; wear a dust mask and

work with a dust extraction device when

connectable

• Follow the dust-related national requirements for the

materials you want to work with

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• Alwaysdisconnectplugfrompowersourcebefore

making any adjustment or changing any accessory

BEFORE USE

• Remove all obstacles on top of as well as underneath the

cutting path before you start cutting

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

• Secure the workpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

DURING USE

• Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord (a cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live” and

could give the operator an electric shock)

• Always keep the cord away from moving parts of the tool;

direct the cord to the rear, away from the tool

• If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

• Never use the tool when cord is damaged; have it

replaced by a qualied person

• In case of electrical or mechanical malfunction,

immediately switch o the tool and disconnect the plug

• Keep hands away from the saw blade while the tool is in

use

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

• Do not use a saw blade which is cracked, deformed or

dull

OUTDOOR USE

• When used outdoors, connect the tool via a fault current

(FI) circuit breaker with a triggering current of 30 mA

maximum, and only use an extension cord which is

intended for outdoor use and equipped with a

splashproof coupling-socket

AFTER USE

• When you put away the tool, switch o the motor and

ensure that all moving parts have come to a complete

standstill

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• On/o 4

• Switch locking for continuous use 5

• Changing saw blades 6

! insert blade to full depth with teeth facing forward

• Sawing at 15°/30°/45° 8

• Adjusting sawing speed to material used 9

! if the tool does not run with wheel E in position 1,

select a higher sawing speed and lower the

sawing speed while the tool runs

• Selecting sawing mode 0

Use lever F 2 for adjusting the orbital action from

accurate cutting (= 0) to fast cutting (= 4)

- 1 setting (“0”) for accurate cutting in all materials,

straight + curved

Содержание

Похожие устройства

d Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these Instructions to operate the power tool Power tools are dangerous in the hands of untrained users e Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tool s operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools f Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control g Use the power tool accessories and tool bits etc In accordance with these Instructions taking Into account the working conditions and the work to be performed Use of the power tool for operations different from those intended could result in a hazardous situation 5 SERVICE a Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained Avoid damage that can be caused by screws nails and other elements in your workpiece remove them before you start working Secure the workpiece a workpiece clamped with clamping devicesorin a vice is held more securely than by hand DURING USE Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or Its own cord a cutting accessory contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock Always keep the cord away from moving parts of the tool direct the cord to the rear away from the tool If the cord is damaged or cut through while working do not touch the cord but immediately disconnect the plug Never use the tool when cord is damaged have it replaced by a qualified person In case of electrical or mechanical malfunction immediately switch off the tool and disconnect the plug Keep hands away from the saw blade while the tool is in use ACCESSORIES SKI L can assure fl awless functionin g of the tool only when original accessories are used Do not use a saw bl ade which I s cracked deformed or dull OUTDOOR USE When used outdoors connect the tool via a fault current Fl circuit breaker with a triggering current of 30 mA maximum and only use an extension cord which is intended for outdoor use and equipped with a splashproof coupling socket AFTER USE When you put away the tool switch off the motor and ensure that all moving parts have come to a complete standstill WHEN CONNECTING NEW 3 PIN PLUG U K ONLY Do not connect the blue neutral or brown live wire in the cord of this tool to the earth terminal of the plug If for any reason the old plug is cut off the cord of this tool it must be disposed of safely and not left unattended SAFETY INSTRUCTIONS FOR JIG SAWS GENERAL Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool tools with a rating of 230V or 240V can also be connected to a 220V supply Check the functioning of the tool before each use and in case of a defect have it repaired immediately by a qualified person never open the tool yourself Do not work materials containing asbestos asbestos is considered carcinogenic This tool should not be used by people under the age of 16 years The noise level when working can exceed 85 dB A wear ear protection Wear protective goggles when working with materials which produce chips Dust from material such as paint containing lead some wood species minerals and metal may be harmful contact with or inhalation of the dust may cause allergic reactions and or respiratory diseases to the operator or bystanders wear a dust mask and work with a dust extraction device when connectable Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunction with additives for wood conditioning wear a dust mask and work with a dust extraction device when connectable Follow the dust related national requirements for the materials you want to work with Use completely unrolled and safe extension cords with a capacity of 16 Amps U K 13 Amps Always disconnect plug from power source before making any adjustment or changing any accessory BEFORE USE Remove all obstacles on top of as well as underneath the cutting path before you start cutting USE On offu Switch locking for continuous use Changing saw blades Insert blade to full depth with teeth facing forward Saw ng at 15730745 Adj usting saw ng speed to material used If the tool does not run with wheel E In position 1 select a higher sawing speed and lower the sawing speed while the tool runs Selecting sawing mode Use lever F for adjusting the orbital action from accurate cutting 0 to fast cutting 4 1 setti ng CO for accurate cutti ng i n all materials straight curved 10

Скачать