Skil 0755 RA [9/148] Application advice
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Skil 0755 RA [9/148] Application advice

Skil 0755 RA [9/148] Application advice
9
• Do not use charger when cord or plug is damaged; cord
or plug should be replaced immediately at one of the
ocially registered SKIL Service Stations
• Do not disassemble charger or tool
EXPLANATIONOFSYMBOLSONTOOL/CHARGER
3Readtheinstructionmanualbeforeuse
4Donotexposetool/chargertorain
5Warning! After switching o the tool the blade continues
to move for a few seconds
6 Payattentiontotheriskofinjurycausedbyflying
debris (keep bystanders a safe distance away from work
area)
7 Only use the charger indoors
8 Double insulation (no earth wire required)
9 Automatic shut-o when charger gets too hot (thermic
fuse blows and charger becomes useless)
0 Incorrect polarity of the charger connection could cause
a hazard (only charge the battery with the charger
supplied)
! Do not dispose of the charger together with household
waste material
@ Do not dispose of the battery together with household
waste material
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
• If for any reason the old plug is cut o the cord of the
charger, it must be disposed of safely and not left
unattended
• Do not connect the blue (= neutral) or brown (= live) wire
in the cord of the charger to the earth terminal of the plug
Use
• Charging battery #
- battery of new tools is not fully charged
! unplugthechargerfromthetoolaftercharging
periodhasendedtherebylengtheningtheservice
lifeofthebattery
IMPORTANT:
- while charging, the charger and the battery may
become warm to touch; this is normal and does not
indicate a problem
! alithium-ionbatterythatisneworhasnotbeen
usedforalongerperioddoesnotdevelopitsfull
capacityuntilafterapproximately3charging/
dischargingcycles
- connect charger B with both wall socket and contact C
- charging light D turns on indicating that the tool is
being charged
- when the battery is fully charged, charging light D
turns o (after 4-6 hours)
- the lithium-ion battery can be charged at any time
(interrupting the charging procedure does not damage
the battery)
- the lithium-ion battery does not have to be empty
before charging (no “memory-eect” as with
nickel-cadmium batteries)
- if you anticipate long periods of non-use for the tool, it
is best to unplug the charger from its power source
• Battery protection
Switches o the tool automatically when
1) the battery temperature is not within the allowable
operating temperature range of -10 to +60°C
2) the lithium-ion battery is nearly empty (to protect
against deep discharge)
! donotcontinuetopresstheon/offswitchafter
thetoolisswitchedoffautomatically;batterymay
bedamaged
• On/o safety switch $
Prevents the tool from being switched on accidentally
- switch on tool by rst pressing safety switch E 2 and
then pulling trigger switch F 2
- switch o tool by releasing trigger switch F
- move tool away from cutting area before switching o
! afterswitchingoffthetoolthebladecontinuesto
rotateforafewseconds
• Changing blades %
! wearprotectivegloves
- turn tool upside down
- push release button G
- slide protective cover H in same direction as arrow
printed on cover and lift it from the housing
! becarefulwhenliftingtheprotectivecover;the
shrubshearbladeinparticularmayfalldown
unexpectedly
- lift blade J or K out and mount required blade as
illustrated
- position protective cover H back and slide it towards
the blade until it snaplocks
• Holding and guiding the tool
! whileworking,alwaysholdthetoolatthe
grey-colouredgriparea(s)^
- maintain a stable working position
- keep your other hand away from the cutting blades
• Trimming hedges &
- trim the sides of the hedge rst (from the bottom
upwards), then cut the top
- trim the side of a hedge in such a way that it will be
slightly narrower at the top
- use a hand saw or pruning shears to cut thicker
branches
- shrub shear blade K as well as grass shear blade J
can be used for trimming hedges
• Trimming grass and shrubs *
- when cutting long grass, work in stages from the top
and take small cuts
- for optimal cutting results, only cut dry grass
- keep the tool away from solid objects in order to
protect the cutting blades against excessive wear
- grass shear blade J can also be used for trimming
shrubs
APPLICATIONADVICE
• For trimming a hedge at a uniform height level
- fasten a piece of string along the length of the hedge
at the desired height
- trim the hedge just above this string
• Recommended cutting/trimming times (Western Europe)
- trim hedges with deciduous leaves in June and
October
- trim evergreen hedges in April and August
- trim conifers and other fast-growing shrubs every 6
weeks from May until October

Содержание

Похожие устройства

Do not use charger when cord or plug is damaged cord or plug should be replaced immediately at one of the officially registered SKIL Service Stations Do not disassemble charger or tool EXPLANATION OF SYMBOLS ON TOOL CHARGER Read the Instruction manual before use Do not expose tool charger to rain Warning After switching off the tool the blade continues to move for a few seconds Pay attention to the risk of Injury caused by flying debris keep bystanders a safe distance away from work area 71 Only use the charger indoors Double insulation no earth wire required Automatic shut off when charger gets too hot thermic fuse blows and charger becomes useless Incorrect polarity of the charger connection could cause a hazard only charge the battery with the charger supplied Do not dispose of the charger together with household waste material Do not dispose of the battery together with household waste material WHEN CONNECTING NEW 3 PIN PLUG U K ONLY If for any reason the old plug is cut off the cord of the charger it must be disposed of safely and not left unattended Do not connect the blue neutral or brown live wire in the cord of the charger to the earth terminal of the plug 2 the lithium ion battery is nearly empty to protect against deep discharge I do not continue to press the on off switch after the tool is switched off automatically battery may be damaged On off safety switch Prevents the tool from being switched on accidentally switch on tool by first pressing safety switch E and then pulling trigger switch F switch off tool by releasing trigger switch F move tool away from cutting area before switching off after switching off the tool the blade continues to rotate for a few seconds Changing blades I wear protective gloves turn tool upside down push release button G slide protective cover H in same direction as arrow printed on cover and lift it from the housing I be careful when lifting the protective cover the shrub shear blade in particular may fall down unexpectedly lift blade J or K out and mount required blade as illustrated position protective cover H back and slide it towards the blade until it snaplocks Holding and guiding the tool while working always hold the tool at the grey coloured grip area s maintain a stable working position keep your other hand away from the cutting blades Trimming hedges trim the sides of the hedge first from the bottom upwards then cut the top trim the side of a hedge in such a way that it will be slightly narrower at the top use a hand saw or pruning shears to cut thicker branches shrub shear blade K as well as grass shear blade J can be used for trimming hedges Trimming grass and shrubs when cutting long grass work in stages from the top and take small cuts for optimal cutting results only cut dry grass keep the tool away from solid objects in order to protect the cutting blades against excessive wear grass shear blade J can also be used for trimming shrubs USE Charging battery battery of new tools is not fully charged I unplug the charger from the tool after charging period has ended thereby lengthening the service life of the battery IMPORTANT while charging the charger and the battery may become warm to touch this is normal and does not indicate a problem a llthlum lon battery that Is new or has not been used for a longer period does not develop Its full capacity until after approximately 3 charging discharging cycles connect charger B with both wall socket and contact C charging light D turns on indicating that the tool is being charged when the battery is fully charged charging light D turns off after 4 6 hours the lithium ion battery can be charged at any time interrupting the charging procedure does not damage the battery the lithium ion battery does not have to be empty before charging no memory effect as with nickel cadmium batteries if you anticipate long periods of non use for the tool it is best to unplug the charger from its power source Battery protection Switches off the tool automatically when 1 the battery temperature is not within the allowable operating temperature range of 10 to 60 C APPLICATION ADVICE For trimming a hedge at a uniform height level fasten a piece of string along the length of the hedge at the desired height trim the hedge just above this string Recommended cutting trimming times Western Europe trim hedges with deciduous leaves in June and October trim evergreen hedges in April and August trim conifers and other fast growing shrubs every 6 weeks from May until October 9

Скачать