AMERICAN DJ Vizi Beam RXONE [15/22] Dmx last stat

ADJ Products, LLC - www.adj.com - Vizi Beam RXONE Instruction Manual Page 29ADJ Products, LLC - www.adj.com - Vizi Beam RXONE Instruction Manual Page 28

Vizi Beam RXONE System Menu

Sound State - In this mode the unit will run in sound

active mode.

1. Press the MENU button until “Sound State” is displayed, press

ENTER.

2. Either “On” or “O” will now be displayed. Use the UP or

DOWN buttons to toggle between “On” and “O”.

3. Press ENTER to conrm your selection, the press and hold the

The sensitivity level can be adjusted between 0 (the lowest) and

100 (most sensitive).

3. Press ENTER to set you desired level.

Pan Invert - Pan Inversion

1. Press the MENU button until “Pan Invert” is displayed, press

ENTER. Either “Yes” or “No” will be displayed.

2. To activate the Pan inversion press the UP or DOWN buttons

until “Yes” is displayed, press ENTER to conm. To deactivate

Pan inversion, select “No” and press Enter.

Tilt Invert - Tilt Inversion

Slave Mode - This will let you set unit as a master or

slave in a master/slave conguration.

1. Press the MENU button until “Slave Mode” is displayed,

press ENTER. Either “Master”, “Slave 1” or “Slave 2” will be

2. Press the UP or DOWN buttons until your desired setting is

displayed, then press ENTER to conm.

xture the Master and then set the next xture to “Slave 2”, the

xtures will now have contrast movement to each other.

DMX Last State - This mode can be used as a precau-

tion mode, that in case the DMX signal is lost, the operating

mode chosen in the setup is the running mode the xture

will go into when the DMX signal is lost. You can also set

this as the operating mode you would like the unit to return

to when power is applied.

1. Press the MENU button until “DMX State” is displayed, press

• Blackout - If the DMX signal is lost or power is applied, the unit

will automatically go into stand by mode.

• Last State - If the DMX signal is lost the xture will stay in the

last DMX set up. If power is applied and this mode is set, the unit

will automatically go into the last DMX set up.

3. Press ENTER to conrm your desired set up.

Vizi Beam RXONE System Menu