![AMERICAN DJ Vizi Beam RXONE [16/22] Lamp tim](/img/pdf.png)
AMERICAN DJ Vizi Beam RXONE [16/22] Lamp tim
![AMERICAN DJ Vizi Beam RXONE [16/22] Lamp tim](/views2/2008177/page16/bg10.png)
ADJ Products, LLC - www.adj.com - Vizi Beam RXONE Instruction Manual Page 30 ADJ Products, LLC - www.adj.com - Vizi Beam RXONE Instruction Manual Page 31
Vizi Beam RXONE System Menu
time press the MENU button.
Lamp On - This function will allow the lamp to be auto-
matically switched ON when power is applied to the xture.
1. Press the MENU button until “Lamp On” is displayed, press
ENTER. Either “On” or “O” will be displayed.
2. To turn “on” the lamp when power is applied to the xture
press the UP or DOWN buttons until “On” is displayed, press
ENTER to conm. To turn “o” the automatic Lamp-On func-
tion, select “O” and press Enter.
Lamp Power On - This function will allow you to
switch the lamp power on/off.
1. Press the MENU button until “Lamp Power On” is displayed,
press ENTER. Either “On” or “O” will be displayed.
2. To turn “on” the lamp press the UP or DOWN buttons until
“On” is displayed, press ENTER to conm. To turn “o” the
lamp, select “O” and press Enter.
Firmware Version - This will display the rmware/soft-
ware version
1. Press the MENU button until “Firmware Version” is displayed.
Press the ENTER button and the rmware/software vesion will
be displayed.
2. Press the MENU button to leave this function.
Factory Restore - This function will restore all factory
settings.
1. Press the MENU button until “Factory Restore” is displayed,
press ENTER. Either “Yes” or “No” will be displayed.
2. To restore factory settings press the UP or DOWN buttons
Vizi Beam RXONE System Menu
Back Light - With this function you can make the back-
light automatically turn off after one minute.
1. Press the MENU button until “Back Light” is displayed, press
ENTER.
2. Either “On” or “O” will now be displayed. Press the UP or
DOWN buttons to select “On” to keep the backlight on at all
times, or “O” to allow the backlight to turn o after 1 minute.
Press any button to turn the backlight on again.
Auto Test - This function will run a self test program.
1. Press the MENU button until “Auto Test” is displayed, press
ENTER.
2. The xture will now run a self test. Press the MENU button to
exit.
Fixture Time - With this function you can display the
running time of the unit.
1. Press the MENU button until “Fixture Time” is displayed,
press ENTER.
2. The running time of the xture will now be displayed. Press
MENU to exit.
Lamp Time - This function will allow you to view the
running lifetime of the installed lamp. The function also lets
you reset the lamp running time when a new lamp as been
installed.
1. Press the MENU button until “Lamp Time” is displayed,
press ENTER. The current lamp time will be displayed.
2. Press ENTER again, and “Reset” will be displayed. Press
ENTER to reset the lamp time to 0. Only reset the lamp time
when installing a new lamp. If you don’t wish to reset the lamp
Содержание
- User instructions p.1
- Vizi beam rxone p.1
- Warning p.2
- Vizi beam rxone p.2
- Unpacking introduction customer support safety precautions features handling precautions registration important discharge lamp warnings fire warning mounting 9 cad drawing 0 photometric chart 0 base layout 1 dmx set up 2 14 power cord daisy chain 4 dmx control 5 dmx traits 6 25 system menu 6 32 offset menu 2 33 fuse replacement 6 lamp replacement 6 38 cleaning 9 trouble shooting 9 warranty 0 specifications 2 p.2
- Unpacking p.2
- Table of contents p.2
- Introduction p.2
- Customer support p.2
- Very important p.4
- Caution p.4
- Screw one clamp via a m12 screw and nut onto the omega holders insert the quick lock fasteners of the first omega holder into the respective holes on the bottom of the vizi beam rxone tighten the quick lock fasteners fully clockwise pull the safety cable through the openings located on the base plate and over the trussing system or a safe fixation spot insert the end in the carabine and tighten the safety screw p.5
- Notice the suitable enviromental temperature for this light ing fixture is between 25 c to 45 c do not place this lighting fixture in an enviroment where the temperatures are under or above the temperatures stated above this will allow the fixture to run at its best and help prolong the fixture life p.5
- Vizi beam rxone photometric chart p.6
- Vizi beam rxone cad drawing p.6
- Vizi beam rxone base layout p.6
- Mm 8 5 p.6
- Mm 15 2 p.6
- Special note line termination p.7
- Power supply p.7
- Notice p.7
- Dmx 512 p.7
- Universal dmx control p.8
- Pin xlr dmx connectors p.8
- Channel value function p.9
- Vizi beam rxone 15 channel mode p.9
- Gobo s p.9
- Vizi beam rxone 15 channel mode p.10
- Channel value function p.10
- Vizi beam rxone 17 channel mode p.11
- Vizi beam rxone 15 channel mode p.11
- Channel value function p.11
- Vizi beam rxone 17 channel mode p.12
- Gobo s p.12
- Channel value function p.12
- Vizi beam rxone 17 channel mode p.13
- Channel value function p.13
- Show mod p.14
- Dmx addres p.14
- Channel mod p.14
- Dmx last stat p.15
- Tilt inver p.15
- Sound stat p.15
- Sound sens p.15
- Slave mode p.15
- Pan inver p.15
- Lamp tim p.16
- Lamp power o p.16
- Lamp o p.16
- Fixture tim p.16
- Firmware versio p.16
- Factory restor p.16
- Back ligh p.16
- Auto tes p.16
- Press the menu button until reset is displayed press enter p.17
- Adjustment of the tilt home position p.17
- Adjustment of the pan home position p.17
- Use this function to reset the motors p.17
- Until yes is displayed press enter to confim if you do not wish restore the settings select no and press enter p.17
- The fixture will now reset p.17
- Setting adjustment for the shutter p.17
- Setting adjustment for the gobo wheel p.17
- Setting adjustment for the color wheel p.17
- Setting adjustment for the 1st prism p.17
- Sound active mode p.18
- Show mode p.18
- Master slave operation p.18
- Warning p.19
- Replacing the lamp is relatively easy unplug the unit from its power source allow the unit 15 minutes to cool down remove the shell that says lamp access on the rear start by unscrewing the four phillips screws that hold the shell in place once the screws are unscrewed remove the shell you will now have access to the lamp p.19
- Lamp replacement p.19
- Fuse replacement p.19
- Caution p.19
- Carefully disconnect the two wires that are connected to the lamp s reflector firmly grab the moving head to hold it in place gently press the lamp down and gently pull the top of the lamp out of the lamp holder note never touch the lamp located within the reflector with your bare hands p.20
- Replace the lamp by setting the lamp into the two bottom brakets gently press the lamp down and insert the top of the lamp into the lamp frame p.20
- Fixture cleaning p.20
- Vizi beam rxone warranty p.21
- Vizi beam rxone notes p.21
- Adj products llc www adj com vizi beam rxone instruction manual page 40 adj products llc www adj com vizi beam rxone instruction manual page 41 p.21
- This fixture contains a electronic bal last which will auto sense the voltage when it is plugged into the power source p.22
- Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice p.22
- Please note p.22
- Model vizi beam rxone p.22
- Auto sensing voltage p.22
- Adj products llc 6122 s eastern ave los angeles ca 90040 usa tel 323 582 2650 fax 323 725 6100 web www adj com e mail info americandj com a d j supply europe b v junostraat 2 6468 ew kerkrade the netherlands service adjgroup eu www adj eu tel 31 45 546 85 00 fax 31 45 546 85 99 p.22
Похожие устройства
-
AMERICAN DJ Vizi BSW300Руководство по эксплуатации -
AMERICAN DJ Focus Spot TWOРуководство по эксплуатации -
AMERICAN DJ Inno Pocket Spot LZRРуководство по эксплуатации -
AMERICAN DJ Inno Color Beam Z19Руководство по эксплуатации -
AMERICAN DJ Vizi Hybrid 16RXРуководство по эксплуатации -
AMERICAN DJ Dotz TPAR SystemРуководство по эксплуатации -
ADJ Hydro Beam X1Руководство по эксплуатации -
Involight LDF100Руководство по эксплуатации -
AMERICAN DJ Focus Spot ONEРуководство по эксплуатации -
Involight LED PAR984WРуководство по эксплуатации -
Antari M-7Руководство по эксплуатации -
STAGG SLI KINGPAR22Руководство по эксплуатации