![AMERICAN DJ Vizi Beam RXONE [2/22] Vizi beam rxone](/img/pdf.png)
AMERICAN DJ Vizi Beam RXONE [2/22] Vizi beam rxone
![AMERICAN DJ Vizi Beam RXONE [2/22] Vizi beam rxone](/views2/2008177/page2/bg2.png)
Unpacking: Thank you for purchasing the Vizi Beam RXONE by
ADJ Products, LLC®. Every Vizi Beam RXONE has been thoroughly
tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect your
xture for any damage and be sure all equipment necessary to oper-
ate the unit has arrived intact. In the event damage has been found
or parts are missing, please contact our toll free customer support
number for further instructions. Please do not return this unit to your
dealer without contacting customer support rst.
Introduction: The Vizi Beam RXONE is a DMX intelligent, moving
head fixture. This fixture has 3 operating modes; sound active mode,
show mode, and DMX control. This unit can be used as a stand alone
unit or in a Master-Slave configuration. For best results use fog or spe-
cial effects smoke to enhance the beams projections.
During the initial start-up or use of this product a light smoke or
smell may arise from the unit. This is a normal process and is
cause by the heat associated with the lamp.
Customer Support: ADJ Products, LLC® provides a toll free cus-
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2610
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Warning! This may cause severe eye damage. Avoid looking
directly into the light source at all times!
WARNING! CAUTION! FIRE HAZARD! DUE TO THE EXTREME
HEAT CAUSED BY THIS LAMP, THE MINIMUM DISTANCE TO
LIGHTED OBJECTS IS 8 METERS (26FT).
Vizi Beam RXONE General Information
ADJ Products, LLC - www.adj.com - Vizi Beam RXONE Instruction Manual Page 2 ADJ Products, LLC - www.adj.com - Vizi Beam RXONE Instruction Manual Page 3
Vizi Beam RXONE
Table of Contents
Unpacking......................................................................3
Introduction....................................................................3
Customer Support......................................................................3
Safety Precautions......................................................................4
Features.........................................................................5
Handling Precautions..................................................................6
Registration......................................................................6
Important Discharge Lamp Warnings.........................................7
Fire Warning................................................................................7
Mounting.........................................................................8-9
CAD Drawing.............................................................................10
Photometric Chart.....................................................................10
Base Layout..............................................................................11
DMX Set-Up.........................................................................12-14
Power Cord Daisy Chain............................................................14
DMX Control..............................................................................15
DMX Traits............................................................................16-25
System Menu.......................................................................26-32
Oset Menu.........................................................................32-33
Fuse Replacement....................................................................36
Lamp Replacement..............................................................36-38
Cleaning..................................................................39
Trouble Shooting.......................................................................39
Warranty.........................................................................40
Specifications....................................................................42
Please see page 7 for important lamp instructions!
Содержание
- User instructions 1
- Vizi beam rxone 1
- Customer support 2
- Introduction 2
- Table of contents 2
- Unpacking 2
- Unpacking introduction customer support safety precautions features handling precautions registration important discharge lamp warnings fire warning mounting 9 cad drawing 0 photometric chart 0 base layout 1 dmx set up 2 14 power cord daisy chain 4 dmx control 5 dmx traits 6 25 system menu 6 32 offset menu 2 33 fuse replacement 6 lamp replacement 6 38 cleaning 9 trouble shooting 9 warranty 0 specifications 2 2
- Vizi beam rxone 2
- Warning 2
- Caution 4
- Very important 4
- Notice the suitable enviromental temperature for this light ing fixture is between 25 c to 45 c do not place this lighting fixture in an enviroment where the temperatures are under or above the temperatures stated above this will allow the fixture to run at its best and help prolong the fixture life 5
- Screw one clamp via a m12 screw and nut onto the omega holders insert the quick lock fasteners of the first omega holder into the respective holes on the bottom of the vizi beam rxone tighten the quick lock fasteners fully clockwise pull the safety cable through the openings located on the base plate and over the trussing system or a safe fixation spot insert the end in the carabine and tighten the safety screw 5
- Mm 15 2 6
- Mm 8 5 6
- Vizi beam rxone base layout 6
- Vizi beam rxone cad drawing 6
- Vizi beam rxone photometric chart 6
- Dmx 512 7
- Notice 7
- Power supply 7
- Special note line termination 7
- Pin xlr dmx connectors 8
- Universal dmx control 8
- Channel value function 9
- Gobo s 9
- Vizi beam rxone 15 channel mode 9
- Channel value function 10
- Vizi beam rxone 15 channel mode 10
- Channel value function 11
- Vizi beam rxone 15 channel mode 11
- Vizi beam rxone 17 channel mode 11
- Channel value function 12
- Gobo s 12
- Vizi beam rxone 17 channel mode 12
- Channel value function 13
- Vizi beam rxone 17 channel mode 13
- Channel mod 14
- Dmx addres 14
- Show mod 14
- Dmx last stat 15
- Pan inver 15
- Slave mode 15
- Sound sens 15
- Sound stat 15
- Tilt inver 15
- Auto tes 16
- Back ligh 16
- Factory restor 16
- Firmware versio 16
- Fixture tim 16
- Lamp o 16
- Lamp power o 16
- Lamp tim 16
- Adjustment of the pan home position 17
- Adjustment of the tilt home position 17
- Press the menu button until reset is displayed press enter 17
- Setting adjustment for the 1st prism 17
- Setting adjustment for the color wheel 17
- Setting adjustment for the gobo wheel 17
- Setting adjustment for the shutter 17
- The fixture will now reset 17
- Until yes is displayed press enter to confim if you do not wish restore the settings select no and press enter 17
- Use this function to reset the motors 17
- Master slave operation 18
- Show mode 18
- Sound active mode 18
- Caution 19
- Fuse replacement 19
- Lamp replacement 19
- Replacing the lamp is relatively easy unplug the unit from its power source allow the unit 15 minutes to cool down remove the shell that says lamp access on the rear start by unscrewing the four phillips screws that hold the shell in place once the screws are unscrewed remove the shell you will now have access to the lamp 19
- Warning 19
- Carefully disconnect the two wires that are connected to the lamp s reflector firmly grab the moving head to hold it in place gently press the lamp down and gently pull the top of the lamp out of the lamp holder note never touch the lamp located within the reflector with your bare hands 20
- Fixture cleaning 20
- Replace the lamp by setting the lamp into the two bottom brakets gently press the lamp down and insert the top of the lamp into the lamp frame 20
- Adj products llc www adj com vizi beam rxone instruction manual page 40 adj products llc www adj com vizi beam rxone instruction manual page 41 21
- Vizi beam rxone notes 21
- Vizi beam rxone warranty 21
- Adj products llc 6122 s eastern ave los angeles ca 90040 usa tel 323 582 2650 fax 323 725 6100 web www adj com e mail info americandj com a d j supply europe b v junostraat 2 6468 ew kerkrade the netherlands service adjgroup eu www adj eu tel 31 45 546 85 00 fax 31 45 546 85 99 22
- Auto sensing voltage 22
- Model vizi beam rxone 22
- Please note 22
- Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 22
- This fixture contains a electronic bal last which will auto sense the voltage when it is plugged into the power source 22
Похожие устройства
- DBX DriveRack 220i Руководство по эксплуатации
- Crown Xti 2002 Руководство по эксплуатации
- Crown MA 12000i Руководство по эксплуатации
- DBX ZONEPRO 640 Руководство по эксплуатации
- Arthur Forty U-990B (UHF) Руководство по эксплуатации
- Crown Xti 6002 Руководство по эксплуатации
- Arthur Forty U-9900C Руководство по эксплуатации
- APart PREZONE1 Руководство по эксплуатации
- APart SDQ5P-W Руководство по эксплуатации
- APart SDQ5P-BL Руководство по эксплуатации
- APart OVO8T-W Руководство по эксплуатации
- APart OVO8-BL Руководство по эксплуатации
- APart OVO8P-BL Руководство по эксплуатации
- AMERICAN DJ Pearl LED DMX Руководство по эксплуатации
- AMERICAN DJ Mystic LED Руководство по эксплуатации
- AMERICAN DJ LED Pixel 4C Руководство по эксплуатации
- AMERICAN DJ LED Quest Руководство по эксплуатации
- AMERICAN DJ Jelly Cosmos Ball Руководство по эксплуатации
- AMERICAN DJ Inno Color Beam Z19 Руководство по эксплуатации
- AMERICAN DJ Fusion TRI FX Bar Руководство по эксплуатации