Honda CBR600F2 (1991-1994) [142/196] Brake system

Содержание

Похожие устройства

Brake System ÄWARNIN0 Oo not get grease on the brake disc or stopping power will be reduced Discard contaminated pads and clean a contaminated disc with a high quality brake degreasing agent Check the brake system by applying the brake after pad replacement NOTE _______ __________ ____________ _________ _______ ______ _ Operate the brake pedal to seat the caliper piston against the pads after pad replacement The brake pad replacement can be serviced without disconnecting the hydraulic system Always replace the brake pads in pairs to assure even disc pressure Procedure Q ty Removal Order 1 Pad pin plug 2 Rear caliper bracket bolt 1 1 3 Pad pin 4 Brake pad 1 2 5 Brake pad shim 6 Brake pad insulator 7 Brake pad spring 2 2 1 14 2 Remarks Installation is in the reverse order of removal After removing the pad pin plug loosen the pad pin After removing the bolt release the brake hose from the clamp on the rear fender 3 and pivot the rear brake caliper assembly upward Clamp the brake hose so that the clamp opening is less than 7mm 0 28 in Position the pad onto the pad retainer in the caliper as shown