Honda CBR600F2 (1991-1994) [56/196] High altitude adjustment u s a only

Содержание

Похожие устройства

High Altitude Adjustment U S A Only 1 PILOT SCREW 2 PILOT SCREW When the vehicle is to be operated continuously above 2 000 m 6 500 feet the carburetor must be readjusted as follows to improve driveability and decrease exhaust emissions Warm up the engine to operating temperatura Stop and go riding for 10 minutes is sufficient Turn each pilot screw to the High Altitude Setting speci fied below High Altitude Setting 1 2 turn in S UUL Pilot screw wrench 07 KM A MN90100 or 07MMA MV9010A 2 UPDATE LABEL Adjust the idle speed to 1 2003 100 rpm California 1 400 100 rpm with the throttle stop screw NOTE________ ___________ ___ ____ _____________ This adjustment must be made at high altitude to ensure proper high altitude operation Attach a Vehicle Emission Control Information Update Label onto the frame under the left side cover as shown NOTE Do not attach the label to any part that can be easily removed from the vehicle AWARNING Sustained operation at an altitude lower than 1 500 m 5 _ 00 feet with the carburetor ad justed for high altitude may cause the engine to idle roughly and stall in traffic It may also cause engine damage due to overheating VEHICLE EMISSION CONTROL INFORMATION UPDATE HONDA MOTOR CO LTD THIS VEHICLE HAS BEEN ADJUSTED TO IMPROVE EMISSION CONTROL PERFORMANCE WHEN OPERATED AT HIGH ALTITUDE ALTITUDE PERFORMANCE ADJUSTMENT INSTRUCTIONS ARE AVAILABLE AT YOUR AUTHORIZED HONDA DEALER t_________________________ When the vehicle is to be operated continuously below 1 500 m 5 000 feet turn each pilot screw to the Low Altitude Setting specific below Low Altitude Setting 1 2 turn out Adjust the idle speed to 1 200 100 rpm California 1 400 100 rpm with the throttle stop screw Be sure to make these adjustments at low altitude Remove the Vehicle Emission Contra Update Label that is attached tc the frame under the left side cover after adjusting for the low altitude 6 15