Black & Decker TE-JS 100 [8/88] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Black & Decker TE-JS 100 [8/88] English

Black & Decker TE-JS 100 [8/88] English
8
ENGLISH
Vibration
The declared vibration emission values stated
in the technical data and the declaration of
conformity have been measured in accordance
with a standard test method provided by EN 60745
and may be used for comparing one tool with
another. The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
Warning! The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which
the tool is used. The vibration level may increase
above the level stated.
When assessing vibration exposure to determine
safety measures required by 2002/44/EC to
protect persons regularly using power tools in
employment, an estimation of vibration exposure
should consider, the actual conditions of use and
the way the tool is used, including taking account
of all parts of the operating cycle such as the
times when the tool is switched off and when it is
running idle in addition to the trigger time.
Labels on tools
Warning! To reduce the risk of injury, the
user must read the instruction manual.
Electrical safety
This tool is double insulated; therefore
no earth wire is required. Always check
that the power supply corresponds to the
voltage on the rating plate.
♦ If the supply cord is damaged, it must be
replaced by the manufacturer or an authorised
Black & Decker Service Centre in order to
avoid a hazard.
Additional safety instructions for non-
rechargeable batteries
♦ Never attempt to open for any reason.
♦ Do not store in locations where the
temperature may exceed 40°C.
♦ When disposing of batteries, follow the
instructions given in the section „Protecting
the environment“.
♦ Do not incinerate the batteries.
♦ Under extreme conditions, battery leakage
may occur. When you notice liquid on the
batteries, proceed as follows:
- Carefully wipe the liquid off using a cloth.
Avoid skin contact.
Additional safety instructions for lasers
Read all of this manual carefully.
This product is not to be used by
children under 16.
Laser radiation.
Do not look into the laser beam.
Do not use optical tools to view the
laser beam.
♦ This laser complies with class 2 according
to EN 60825-1:2007. Do not replace a laser
diode with a different type. If the laser is
damaged, have the laser repaired by an
authorised repair agent.
♦ Do not use the laser for any purpose other
than projecting laser lines.
♦ An exposure of the eye to the beam of a class
2 laser is considered safe for a maximum of
0.25 seconds. Eyelid refl exes will normally
provide adequate protection. At distances
greater than 1m, the laser complies with class
1 and is therefore considered completely safe.
♦ Never look into the laser beam directly and
intentionally.
♦ Do not use optical tools to view the laser
beam.
♦ Do not set up the tool where the laser beam
can cross any person at head height.
♦ Do not let children come near the laser.
Features
1. Variable speed control knob
2. On/off switch
3. Lock-on button
4. Blade storage compartment cover
5. Shoe plate locking lever
6. Dust extraction outlet
7. Shoe plate
8. Saw blade support roller
9. Pendulum stroke selector
Additional features (fi g. A)
Additional features may be applicable depending
upon the product purchased. The additional
features applicable to the catalogue number
purchased are shown in fi g. A.
Assembly
Warning! Before attempting any of the following
operations, make sure that the tool is switched

Содержание

Похожие устройства

Скачать