Vitek VT-2170 [6/52] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-2170 [6/52] English

Vitek VT-2170 [6/52] English
6
ENGLISH
Normal Wind:( when two indicators are off)
Constant rotation with different wind speed
of “LOW”, “MED” and “HI” as preset by the
“SPEED” (21) button.
Natural Wind:
The fan operates in a circle of Hi, Medium
and Low as preset by microcomputer pro-
gram. Wind speed changes from light to
strong.
Sleeping Mode:
Under this mode, the speed will lower down
gradually to accommodate the change of
human body temperature, eliminating the
risk of getting cold during sleeping. The
lowering procedure will be as follows:
(1) When set at “Hi” position at the begin-
ning, the fan will work at high speed for half
an hour, and then it will switch to medium
wind speed. After another half an hour, it
will change from medium wind speed to low
wind speed.
(2) When set at “Medium” position at the be-
ginning, the fan will work at medium speed
for half an hour, then the fan switch to low
speed.
(3) When set at “Low” position at the begin-
ning, the fan will operate at low speed.
Natural Mode: (when two indicators are on)
When both the two mode indicators light up
simultaneously, High, Medium, during an
hour.
(1) When set at high natural wind position,
the unit will operate from high to medium af-
ter one hour. The unit will stop at the preset
time or whenever it is ВЫКЛ..
(2) When set at medium natural wind posi-
tion. The unit will work at this position till the
unit stops at the preset time or whenever it
is ВЫКЛ..
• Press the “ВЫКЛ.” (23) button to switch the
unit to “STAND-BY”.
Timer setting
To switch on Timer, press the “ТАЙМЕР” (20)
button on the control panel, each press in-
creases timer operation by 1/2. Max. timer
operation time is 7,5 hours. Timer indictor will
light up on the indication panel (27). After the
set time passes the unit will switch ВЫКЛ..
Remote control usage:
Open the battery compartment lid of the re-
mote control (5) and put 2 batteries of “ААА”
type, strictly following the polarity. Close the
battery compartment lid
Attention:
Functions of the buttons on the remote con-
trol (5) fully correspond to those on the con-
trol pa-nel (1).
Ionization mode
Ionization is performed in continuous mode;
indicator (33) shows it. Negatively charged
ions generator enriches air with millions of
negatively charged ions, useful for health.
Usage of “ICE BOX” (38)
The unit is equipped with two unique “ice box-
es” (38), preserving cool, they can decrease
water temperature in water tank, thus the wind
will be cooler.
Operation Method
1) Put the ICE BOXES into the refrigerator and
keep them inside till they are completely
frozen.
2) Put them into the water tank from the water
tank cover (18) on the left of the unit. And
then close the unit. The temperature of the
water will be lower than that of the ambi-
ence, making the wind cooler.
3) The unit assembles with two ICE BOXES,
which should be periodically frozen.
Troubleshooting
Problem Causes Solution
The unit
can not be
switched
on
1. The unit is
not con-
nected to
the wall
outlet.
2. Absence of
voltage in
the outlet.
3. Malfunc-
tion of the
unit.
1. Connect the
unit to the wall
outlet.
2. Try to connect
another ap-
pliance to the
same outlet.
3. Apply to the au-
thorized service
center for repair
of the unit.
2170.indd 62170.indd 6 24.06.2008 9:52:4324.06.2008 9:52:43

Содержание

Похожие устройства

ENGLISH Normal Wind when two indicators are off Constant rotation with different wind speed of LOW MED and HI as preset by the SPEED 21 button Remote control usage Open the battery compartment lid of the re mote control 5 and put 2 batteries of AAA type strictly following the polarity Close the Natural Wind The fan operates in a circle of Hi Medium and Low as preset by microcomputer pro gram Wind speed changes from light to battery compartment lid Attention Functions strong Sleeping Mode trol 5 fully correspond to those on the con trol pa nel 1 Under this mode the speed will lower down gradually to accommodate the change of Ionization mode human body temperature eliminating the risk of getting cold during sleeping The lowering procedure will be as follows 1 When set at Hi position at the begin Ionization is performed in continuous mode indicator 33 shows it Negatively charged ions generator enriches air with millions of negatively charged ions useful for health ning the fan will work at high speed an hour and then it will switch to wind speed After another half an will change from medium wind speed Usage of ICE BOX 38 The unit is equipped with two unique ice box es 38 preserving cool they can decrease for half medium hour it to low of the buttons on the remote con wind speed 2 When set at Medium position at the be ginning the fan will work at medium speed water temperature in water tank thus the wind will be cooler for half an hour then the fan switch to low Operation Method speed 3 When set at Low position at the begin ning the fan will operate at lowspeed Natural Mode when two indicators are on 1 Put the ICE BOXES into the refrigerator and keep them inside till they are completely frozen 2 Putthem intothe water tank from the water When both the two mode indicators light up simultaneously High Medium during an hour tank cover 18 on the left of the unit And then close the unit The temperature of the water will be lower than that of the ambi ence making the wind cooler 1 When set at high natural wind position the unit will operate from high to medium af ter one hour The unit will stop at the preset time or whenever it is ВЫКЛ 2 When set at medium natural wind posi 3 The unit assembles with two which should be periodically frozen ICE BOXES Troubleshooting tion The unit will work at this position till the unit stops at the preset time or whenever it is ВЫКЛ Press the ВЫКЛ 23 button to switch the unit to STAND BY Problem The unit can not be switched on Timer setting To switch on Timer press the ТАЙМЕР 20 button on the control panel each press in creases timer operation by 1 2 Max timer operation time is 7 5 hours Timer indictor will light up on the indication panel 27 After the Causes 1 The unit is not con nected to the wall outlet 2 Absence of voltage in the outlet 3 Malfunc tion of the unit Solution 1 Connect the unit to the wall outlet 2 Try to connect another ap pliance to the same outlet 3 Apply to the au thorized service center for repair of the unit set time passes the unit will switch ВЫКЛ 6 217O indd 6 24 062008 9 52 43

Скачать