Home
Главная
Indesit
Плиты
K6 C51/R
Инструкция по эксплуатации Страница: 34

Indesit K6 C51/R [34/68] Routine maintenance and cleaning

Routine Maintenance and Cleaning

Disconnect the oven from the source of electricity

before performing any maintenance or cleaning. To

ensure a long life for your oven, clean it frequently and

carefully, keeping in mind that:

· Do not use steam equipment to clean the appliance.

· the enamelled parts and the self-cleaning panels

should be washed with warm water without the addition

of abrasive powders or corrosive substances which

could damage the finish;

· stainless steel may become marked if it comes into

contact with very hard water or harsh detergents

(containing phosphorous) for long periods of time. After

cleaning, it is advisable to rinse thoroughly and dry. It

is also recommended to dry any water drops;

· avoid dirt and grease accumulating on the control panel

by cleaning it frequently. Use non-abrasive sponges or

soft cloths to avoid scratching enamelled or shiny steel

parts.

Cleaning the hob surface

Prior to cooking, the hob surface should always be cleaned

using a damp cloth to remove any dust or stray food

particles. The hob surface should be regularly cleaned

with a lukewarm solution of water and a mild detergent.

Periodically it may be necessary to use a proprietary

ceramic hob cleaner. First remove all spilt food and fat

with a window scrape, preferably the razor blade type

(not supplied) or, failing that, the fixed blade

razor edge type (see Fig. A). Then clean the hob while it

is still warm to the touch with a suitable cleaner and paper

towel.

Then rinse it and wipe it dry with a clean cloth .If aluminium

foil or plastic items are accidentally allowed to melt on the

hob surface they should be immediately removed from

the hot cooking area with a scraper. This will avoid any

possible damage to the surface. This also applies to sugar

or any food with a high sugar content.

Do not use abrasive sponges or scourers of any type.

Corrosive cleaners such as oven sprays and stain

removers should also not be used (see Fig. B).

Fig. A Fig. B

Glass ceramic hob cleaners Available from

Window scraper Razor blade

scrapers

DIY Stores

Replacement blades DIY Stores,

supermarkets,

chemists

COLLO luneta

HOB BRITE

Hob Clean

SWISSCLEANER

Boots, Co-op stores,

department stores, Regional

Electricity Company shops,

supermarkets

Replacing the Oven Lamp

• Disconnect the oven from the power supply by means

of the omnipolar switch used to connect the appliance

to the electrical mains; or disconnect the plug if it is

accessible.

• Remove the glass cover of the lamp-holder.

• Remove the lamp and replace it with a lamp resistant

to high temperatures (300°C) with the following speci-

fications:

- Voltage: 230V

- Wattage: 25W

- Socket: E14

• Replace the glass cover and connect the oven to the

mains.

Содержание

Похожие устройства

Routine Maintenance and Cleaning Disconnect the oven from the source of electricity before performing any maintenance or cleaning To ensure a long life for your oven clean it frequently and carefully keeping in mind that Do not use steam equipment to clean the appliance the enamelled parts and the self cleaning panels should be washed with warm water without the addition of abrasive powders or corrosive substances which could damage the finish stainless steel may become marked if it comes into contact with very hard water or harsh detergents containing phosphorous for long periods of time After cleaning it is advisable to rinse thoroughly and dry It is also recommended to dry any water drops avoid dirt and grease accumulating on the control panel by cleaning it frequently Use non abrasive sponges or soft cloths to avoid scratching enamelled or shiny steel parts CERAM not supplied or failing the fixed DIY Stores Replacement blades DIY Stores supermarkets chemists COLLO luneta HOB BRITE Hob Clean SWISSCLEANER Boots Co op stores department stores Regional Electricity Company shops supermarkets of the omnipolar switch used to connect the appliance to the electrical mains or disconnect the plug if it is accessible Remove the glass cover of the lamp holder Remove the lamp and replace it with a lamp resistant to high temperatures 300 C with the following speci fications Voltage 230V Wattage 25 W Socket E14 Replace the glass cover and connect the oven to the blade mains razor edge type see Fig A Then clean the hob while it is still warm to the touch with a suitable cleaner and paper towel Then rinse it and wipe it dry with a clean cloth If aluminium foil or plastic items are accidentally allowed to melt on the hob surface they should be immediately removed from the hot cooking area with a scraper This will avoid any possible damage to the surface This also applies to sugar or any food with a high sugar content Do not use abrasive sponges or scourers of any type Corrosive cleaners such as oven sprays and stain removers should also not be used see Fig B Fig B GB Window scraper Razor blade scrapers Replacing the Oven Lamp to use a proprietary all spilt food and fat the razor blade type that Available from Disconnect the oven from the power supply by means Cleaning the hob surface Prior to cooking the hob surface should always be cleaned using a damp cloth to remove any dust or stray food particles The hob surface should be regularly cleaned with a lukewarm solution of water and a mild detergent Periodically it may be necessary ceramic hob cleaner First remove with a window scrape preferably Glass ceramic hob cleaners 34

Скачать

Случайные обсуждения

Ответы 0

Как снять крышку духовки?

2 года назад

Ответы 1

Где можно приобрести скребки и сменные лезвия?

2 года назад

Ответы 1

Zalecenia eksploatacyjne W celu zapewnienia SPRAWNEGO i BEZPIECZNEGO dziaiania urzqdzenia nalezy: