D-Link DIR-632 [26/116] Internet setup

21D-Link DIR-632 User Manual

Section 3 - Conguration

This is a free security option that provides Anti-Phishing and auto correction of

URL typos. Check Enable.Advanced.DNS.Service if you wish to use this free

security option.

Select Static if your ISP assigned you the IP address, subnet mask, gateway, and

DNS server addresses. In most cases, select Dynamic.

Enter the L2TP IP address supplied by your ISP (Static only).

Enter the Subnet Mask supplied by your ISP (Static only).

Enter the Gateway IP Address provided by your ISP.

Enter the Server IP provided by your ISP (optional).

Enter your L2TP username.

Enter your L2TP password and then retype the password in the next box.

Select either Always-on, On-Demand, or Manual.

Enter a maximum idle time during which the Internet connection is maintained

during inactivity. To disable this feature, enable Auto-reconnect.

Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).

Advanced DNS

Service Description:

Address Mode:

L2TP IP Address:

L2TP Subnet Mask:

L2TP Gateway:

L2TP Server IP:

Username:

Password:

Reconnect Mode:

Maximum Idle Time:

DNS Servers:

Internet Setup

L2TP

Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option

is typically used for DSL services.

MTU:

Clone MAC

Address:

Maximum Transmission Unit - you may need to change the MTU for optimal performance with

your specic ISP. 1400 is the default MTU.

The default MAC Address is set to the Internet port’s physical interface MAC address on the

Broadband Router. It is not recommended that you change the default MAC address unless

required by your ISP. You can use the Clone.Your.PC’s.MAC.Address button to replace the

Internet port’s MAC address with the MAC address of your Ethernet card.