D-Link DIR-632 [32/116] Dhcp server settings

27D-Link DIR-632 User Manual

Section 3 - Conguration

Check this box to enable the DHCP server on your router.

Uncheck to disable this function.

Enter the starting and ending IP addresses for the DHCP

server’s IP assignment.

Note: If you statically (manually) assign IP addresses to your

computers or devices, make sure the IP addresses are outside

of this range or you may have an IP conict.

The length of time for the IP address lease. Enter the Lease

time in minutes.

Enable this feature to broadcast your networks DHCP server

to LAN/WLAN clients.

NetBIOS allows LAN hosts to discover all other computers

within the network, enable this feature to allow the DHCP

Server to oer NetBIOS conguration settings.

Enable this feature to allow WINS information to be learned

from the WAN side, disable to allow manual conguration.

This feature allows the conguration of a NetBIOS ‘domain’

name under which network hosts operates. This setting

has no eect if the ‘Learn NetBIOS information from WAN’

is activated.”

Enable DHCP

Server:

DHCP IP Address

Range:

DHCP Lease Time:

Always Broadcast:

NetBIOS

Announcement:

Learn NetBIOS

from WAN:

NetBIOS Scope:

DHCP Server Settings

DHCP stands for Dynamic Host Control Protocol. The DIR-632 has a built-in DHCP server. The DHCP Server will automatically assign an IP address

to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP

Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DIR-632. The

DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting

and ending address of the IP address pool.