![D-Link DIR-632 [56/116] Ipv6 over pppoe stateful](/img/pdf.png)
D-Link DIR-632 [56/116] Ipv6 over pppoe stateful
![D-Link DIR-632 [56/116] Ipv6 over pppoe stateful](/views2/1044518/page56/bg38.png)
51D-Link DIR-632 User Manual
Section 3 - Conguration
IPv6 over PPPoE (Stateful)
Select PPPoE from the drop-down menu.
Enter the PPPoE account settings supplied by your Internet provider (ISP).
Select Static if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses. In most cases, select Dynamic.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in the next box.
Enter the ISP Service Name (optional).
Select either Always-on, On-Demand, or Manual.
Enter a maximum idle time during which the Internet connection is maintained
during inactivity. To disable this feature, enable Auto-reconnect.
Select either Obtain. DNS. server. address. automatically or Use. the.
following.DNS.Address.
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
My IPv6 Connection:
PPPoE:
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnection Mode:
Maximum Idle Time:
IPv6 DNS Settings:
Primary/Secondary DNS
Address:
LAN IPv6 Address:
LAN Link-Local Address:
Содержание
- Manual revisions 2
- Preface 2
- Trademarks 2
- Table of contents 3
- D link dir 632 user manual 6
- Package contents 6
- Product overview 6
- Section 1 product overview 6
- Cd installation wizard requirements 7
- D link dir 632 user manual 7
- Network requirements 7
- Section 1 product overview 7
- System requirements 7
- Web based configuration utility requirements 7
- Introduction 8
- Features 9
- Connections 10
- D link dir 632 user manual 10
- Hardware overview 10
- Section 1 product overview 10
- D link dir 632 user manual 11
- Hardware overview 11
- Section 1 product overview 11
- Before you begin 12
- Installation 12
- Wireless installation considerations 13
- Connect to cable dsl satellite modem 14
- Connect to another router 15
- Getting started 17
- Configuration 18
- Web based configuration utility 18
- Setup wizard 19
- D link dir 632 user manual 23
- Dynamic cable 23
- Manual configuration 23
- Section 3 configuration 23
- Choose pppoe point to point protocol over ethernet if your isp uses a pppoe connection your isp will provide you with a username and password this option is typically used for dsl services make sure to remove your pppoe software from your computer the software is no longer needed and will not work through a router 24
- D link dir 632 user manual 24
- Internet setup 24
- Pppoe dsl 24
- Section 3 configuration 24
- Choose pptp point to point tunneling protocol if your isp uses a pptp connection your isp will provide you with a username and password this option is typically used for dsl services 25
- D link dir 632 user manual 25
- Internet setup 25
- Section 3 configuration 25
- Choose l2tp layer 2 tunneling protocol if your isp uses a l2tp connection your isp will provide you with a username and password this option is typically used for dsl services 26
- D link dir 632 user manual 26
- Internet setup 26
- Section 3 configuration 26
- D link dir 632 user manual 27
- Internet setup 27
- Section 3 configuration 27
- Select static ip address if all the internet port s ip information is provided to you by your isp you will need to enter in the ip address subnet mask gateway address and dns address es provided to you by your isp each ip address entered in the fields must be in the appropriate ip form which are four octets separated by a dot x x x x the router will not accept the ip address if it is not in this format 27
- Static assigned by isp 27
- Wireless settings 28
- D link dir 632 user manual 29
- Manual wireless settings 29
- Section 3 configuration 29
- D link dir 632 user manual 30
- Section 3 configuration 30
- D link dir 632 user manual 31
- Network settings 31
- Section 3 configuration 31
- This section will allow you to change the local network settings of the router and to configure the dhcp settings 31
- D link dir 632 user manual 32
- Dhcp server settings 32
- Dhcp stands for dynamic host control protocol the dir 632 has a built in dhcp server the dhcp server will automatically assign an ip address to the computers on the lan private network be sure to set your computers to be dhcp clients by setting their tcp ip settings to obtain an ip address automatically when you turn your computers on they will automatically load the proper tcp ip settings provided by the dir 632 the dhcp server will automatically allocate an unused ip address from the ip address pool to the requesting computer you must specify the starting and ending address of the ip address pool 32
- Section 3 configuration 32
- D link dir 632 user manual 33
- Section 3 configuration 33
- D link dir 632 user manual 34
- Dhcp reservation 34
- If you want a computer or device to always have the same ip address assigned you can create a dhcp reservation the router will assign the ip address only to that computer or device 34
- Note this ip address must be within the dhcp ip address range 34
- Section 3 configuration 34
- Usb settings 35
- Virtual server 36
- D link dir 632 user manual 37
- Section 3 configuration 37
- This will allow you to open a single port if you would like to open a range of ports refer to the next page 37
- D link dir 632 user manual 38
- Port forwarding 38
- Section 3 configuration 38
- This will allow you to open a single port or a range of ports 38
- Application rules 39
- D link dir 632 user manual 39
- Section 3 configuration 39
- Some applications require multiple connections such as internet gaming video conferencing internet telephony and others these applications have difficulties working through nat network address translation special applications makes some of these applications work with the dir 632 if you need to run applications that require multiple connections specify the port normally associated with an application in the trigger port field select the protocol type as tcp or udp then enter the firewall public ports associated with the trigger port to open them for inbound traffic 39
- The dir 632 provides some predefined applications in the table on the bottom of the web page select the application you want to use and enable it 39
- D link dir 632 user manual 40
- Qos engine 40
- Section 3 configuration 40
- The qos engine option helps improve your network gaming performance by prioritizing applications by default the qos engine settings are disabled and application priority is not classified automatically 40
- D link dir 632 user manual 41
- Network filters 41
- Section 3 configuration 41
- Use mac media access control filters to allow or deny lan local area network computers by their mac addresses from accessing the network you can either manually add a mac address or select the mac address from the list of clients that are currently connected to the broadband router 41
- Access control 42
- Access control wizard 42
- Click save to save the access control rule 44
- D link dir 632 user manual 44
- Enter the rule 44
- Section 3 configuration 44
- Select the filtering method and then click next to continue 44
- To enable web logging click enable 44
- Website filters 45
- D link dir 632 user manual 46
- Inbound filters 46
- Section 3 configuration 46
- The inbound filter option is an advanced method of controlling data received from the internet with this feature you can configure inbound data filtering rules that control data based on an ip address range inbound filters can be used with virtual server port forwarding or remote administration features 46
- A firewall protects your network from the outside world the d link dir 632 offers a firewall type functionality the spi feature helps prevent cyber attacks sometimes you may want a computer exposed to the outside world for certain types of applications if you choose to expose a computer you cam enable dmz dmz is short for demilitarized zone this option will expose the chosen computer completely to the outside world 47
- D link dir 632 user manual 47
- Firewall settings 47
- Section 3 configuration 47
- D link dir 632 user manual 48
- Routing 48
- Section 3 configuration 48
- The routing option is an advanced method of customizing specific routes of data through your network 48
- Advanced wireless settings 49
- D link dir 632 user manual 49
- Section 3 configuration 49
- Advanced network settings 50
- D link dir 632 user manual 50
- Section 3 configuration 50
- D link dir 632 user manual 51
- Link local connectivity 51
- Section 3 configuration 51
- D link dir 632 user manual 52
- Section 3 configuration 52
- Static ipv6 stateful 52
- D link dir 632 user manual 53
- Section 3 configuration 53
- Static ipv6 stateless 53
- D link dir 632 user manual 54
- Dhcpv6 stateful 54
- Section 3 configuration 54
- D link dir 632 user manual 55
- Dhcpv6 stateless 55
- Section 3 configuration 55
- D link dir 632 user manual 56
- Ipv6 over pppoe stateful 56
- Section 3 configuration 56
- D link dir 632 user manual 57
- Section 3 configuration 57
- D link dir 632 user manual 58
- Ipv6 over pppoe stateless 58
- Section 3 configuration 58
- D link dir 632 user manual 59
- Section 3 configuration 59
- D link dir 632 user manual 60
- Section 3 configuration 60
- To 4 tunneling stateful 60
- D link dir 632 user manual 61
- Section 3 configuration 61
- To 4 tunneling stateless 61
- D link dir 632 user manual 62
- Ipv6 in ipv4 tunneling stateful 62
- Section 3 configuration 62
- D link dir 632 user manual 63
- Ipv6 in ipv4 tunneling stateless 63
- Section 3 configuration 63
- Administrator settings 64
- D link dir 632 user manual 64
- Section 3 configuration 64
- This page will allow you to change the administrator and user passwords you can also enable remote management there are two accounts that can access the management interface through the web browser the accounts are admin and user admin has read write access while user has read only access user can only view the settings but cannot make any changes only the admin account has the ability to change both admin and user account passwords 64
- D link dir 632 user manual 65
- Section 3 configuration 65
- The time configuration option allows you to configure update and maintain the correct time on the internal system clock from this section you can set the time zone that you are in and set the time server daylight saving can also be configured to automatically adjust the time when needed 65
- Time settings 65
- D link dir 632 user manual 66
- Section 3 configuration 66
- Syslog 66
- The broadband router keeps a running log of events and activities occurring on the router you may send these logs to a syslog server on your network 66
- D link dir 632 user manual 67
- Email settings 67
- Section 3 configuration 67
- The email feature can be used to send the system log files router alert messages and firmware update notification to your email address 67
- D link dir 632 user manual 68
- Section 3 configuration 68
- System settings 68
- D link dir 632 user manual 69
- Firmware 69
- Section 3 configuration 69
- You can upgrade the firmware of the router here make sure the firmware you want to use is on the local hard drive of the computer click on browse to locate the firmware file to be used for the update please check the d link support site for firmware updates at http support dlink com you can download firmware upgrades to your hard drive from the d link support site 69
- D link dir 632 user manual 70
- Dynamic dns 70
- Section 3 configuration 70
- The ddns feature allows you to host a server web ftp game server etc using a domain name that you have purchased www whateveryournameis com with your dynamically assigned ip address most broadband internet service providers assign dynamic changing ip addresses using a ddns service provider your friends can enter in your domain name to connect to your server no matter what your ip address is 70
- D link dir 632 user manual 71
- Section 3 configuration 71
- System check 71
- D link dir 632 user manual 72
- Schedules 72
- Section 3 configuration 72
- Device information 73
- D link dir 632 user manual 74
- Section 3 configuration 74
- The router automatically logs records events of possible interest in it s internal memory if there isn t enough internal memory for all events logs of older events are deleted but logs of the latest events are retained the logs option allows you to view the router logs you can define what types of events you want to view and the level of the events to view this router also has external syslog server support so you can send the log files to a computer on your network that is running a syslog utility 74
- D link dir 632 user manual 76
- Internet sessions 76
- Section 3 configuration 76
- The internet sessions page displays full details of active internet sessions through your router an internet session is a conversation between a program or application on a lan side computer and a program or application on a wan side computer 76
- D link dir 632 user manual 77
- Section 3 configuration 77
- Routing table 78
- Wireless 79
- Support 80
- What is wpa 81
- Wireless security 81
- Wireless network setup wizard 82
- Add wireless device with wps wizard 84
- Configure wpa personal psk 85
- Configure wpa enterprise radius 86
- Connect to a wireless network 88
- Using window 88
- Connect to a wireless network 91
- Using windows vist 91
- Configure wireless security 92
- Connect using wcn 2 94
- Connect to a wireless network 95
- Using window 95
- Configure wpa psk 96
- Troubleshooting 98
- Wireless basics 102
- How does wireless work 103
- What is wireless 103
- Why d link wireless 103
- Wireless local area network wlan 103
- Wireless personal area network wpan 103
- Who uses wireless 104
- Where is wireless used 105
- Wireless modes 106
- Check your ip address 107
- Networking basics 107
- Statically assign an ip address 108
- Appendix c technical specifications 109
- D link dir 632 user manual 109
- Technical specifications 109
- Contacting technical support 110
- Appendix e warranty 111
- D link dir 632 user manual 111
- Warranty 111
- Appendix e warranty 112
- D link dir 632 user manual 112
- Software will be warranted for the remainder of the original warranty period and is subject to the same limitations and exclusions if a material non conformance is incapable of correction or if d link determines in its sole discretion that it is not practical to replace the non conforming software the price paid by the original licensee for the non conforming software will be refunded by d link provided that the non conforming software and all copies thereof is first returned to d link the license granted respecting any software for which a refund is given automatically terminates 112
- Appendix e warranty 113
- D link dir 632 user manual 113
- Appendix e warranty 114
- D link dir 632 user manual 114
- Appendix e warranty 115
- D link dir 632 user manual 115
- Registration 116
Похожие устройства
- Texet T-425 Инструкция по эксплуатации
- Epson XP-103 Инструкция по эксплуатации
- D-Link DIR-635 Инструкция по эксплуатации
- JVC AV-14FTG2 Инструкция по эксплуатации
- D-Link DIR-645 Инструкция по эксплуатации
- Vitek VT-1202 Инструкция по эксплуатации
- Epson L200 Инструкция по эксплуатации
- D-Link DIR-651 Инструкция по эксплуатации
- Samsung SG06DCGWHN Инструкция по эксплуатации
- Samsung CLX-3305/XEV Инструкция по эксплуатации
- D-Link DIR-655 Инструкция по эксплуатации
- Nexx NDV-9000 Инструкция по эксплуатации
- Samsung SCX-3400 Инструкция по эксплуатации
- D-Link DIR-655/B1 Инструкция по эксплуатации
- Texet T-422 Инструкция по эксплуатации
- Samsung SCX-3405FW Инструкция по эксплуатации
- D-Link DIR-685 Инструкция по эксплуатации
- Electrolux EW 1250 WI Инструкция по эксплуатации
- Samsung SCX-3405W/XEV Инструкция по эксплуатации
- D-Link DIR-815 Инструкция по эксплуатации
Скачать
Случайные обсуждения
Ответы 0
Пропал web-интерфейс. При этом все работает: и интернет, и Wi-Fi, и LAN. Выключал-включал, не помогло. Прошивку не менял. Как была 1.0.0, так и стоит. Что можно сделать?
7 лет назад