D-Link DGS-6604 — руководство по команде ip local-proxy-arp для сетевых интерфейсов [319/1106]

Превью страниц Страница 319 / 1106

DGS-6600 Series Switch ip local-proxy-arp

CLI Reference Guide

309

ip local-proxy-arp

Use this command to enable local proxy ARP features on an interface. Use the

no form of this command to disable local proxy ARP features on an interface.

ip local-proxy-arp

no ip local-proxy-arp

Syntax

Description

None.

Default Disable.

Command Mode Interface configuration.

Usage Guideline Use this command to enable local proxy ARP function on an interface. If local

proxy ARP function is enabled, the local proxy ARP feature allows the switch to

respond to ARP requests for targeted IP addresses if the ingress interface is the

same as the egress interface after routing tables are referenced, which normally

no routing is required. This is primarily used when hosts in the connected subnet

are L2-separated with features like Private VLAN. The IP proxy ARP features

must be enabled before local proxy ARP features can be used.

Examples Enable local proxy ARP on VLAN100.

You can verify your settings by entering the show ip local-proxy-arp command.

switch > enable

switch# configure terminal

switch(config)# interface vlan100

switch(config-if)# ip local-proxy-arp